scieee Science in your language
[en] (orig)

Ultra-Thin Plastic Scintillator-Based Proton Detector for Timing Applications

Abstract

The development of advanced detection systems for charged particles in laser-based accelerators and the need for precise time of flight measurements have led to the creation of detectors using ultra-thin plastic scintillators, indicating their use as transmission detectors with low energy loss and minimal dispersion for protons around a few MeV. This study introduces a new detection system designed by the Institute for Instrumentation in Molecular Imaging for time of flight and timing applications at the National Accelerator Center in Seville. The system includes an ultra-thin EJ-214 plastic scintillator coupled with a photomultiplier tube and shielded by aluminized mylar sheets. The prototype installation as an external trigger system at the ion beam nuclear microprobe of the aforementioned facility, along with its temporal performance and ion transmission, was thoroughly characterized. Additionally, the scintillator thickness and uniformity were analyzed using Rutherford backscattering spectrometry. Results showed that the experimental thickness of the EJ-214 sheet differs by approximately 46% from the supplier specifications. The detector response to MeV protons demonstrates a strong dependence on the impact position but remains mostly linear with the applied working bias. Finally, single ion detection was successfully achieved, demonstrating the applicability of this new system as a diagnostic tool.

Read accessible full text

Ultra-Thin Plastic Scintillator-Based Proton Detector for Timing Applications

Author: Rodríguez Ramos, Mauricio; García López, Francisco Javier; Seimetz, Michael; Juan Morales, Jessica; Torres Muñoz, Carmen; Jiménez Ramos, María del Carmen
Publisher: Multidisciplinary Digital Publishing Institute (MDPI)
Year: 2025
DOI: 10.3390/s25030971
Source: https://idus.us.es/bitstreams/338aeda9-e5ef-4795-bf63-533761475f38/download
Academic Edi o : E win Peine
Recei ed: 15 No embe 2024
Re ised: 29 Janua y 2025
Accep ed: 4 Feb ua y 2025
Published: 6 Feb ua y 2025
Ci a ion: Ramos, M.R.; López, J.G.;
Seime z, M.; Mo ales, J.J.; Muñoz, C.T.;
Ramos, M.d.C.J. Ul a-Thin Plas ic
Scin illa o -Based P o on De ec o o
Timing Applica ions. Senso s 2025,25,
971. h ps://doi.o g/10.3390/
s25030971
Copy igh : © 2025 by he au ho s.
Licensee MDPI, Basel, Swi ze land.
This a icle is an open access a icle
dis ibu ed unde he e ms and
condi ions o he C ea i e Commons
A ibu ion (CC BY) license
(h ps://c ea i ecommons.o g/
licenses/by/4.0/).
A icle
Ul a-Thin Plas ic Scin illa o -Based P o on De ec o o
Timing Applica ions
Mau icio Rod íguez Ramos 1,* , Ja ie Ga cía López 1,2 , Michael Seime z 3, Jessica Juan Mo ales 3,
Ca men To es Muñoz 1and Ma ía del Ca men Jiménez Ramos 1,4
1Cen o Nacional de Acele ado es (U. Se illa, CSIC, J. de Andalucia), 41092 Se ille, Spain; [email p o ec ed] (J.G.L.);
[email p o ec ed] (C.T.M.); [email p o ec ed] (M.d.C.J.R.)
2Depa amen o de Física A ómica, Molecula y Nuclea , Uni e sidad de Se illa, 41012 Se ille, Spain
3Ins i u o de Ins umen ación pa a Imagen Molecula (i3M), CSIC-Uni e si a Poli ècnica de València,
46022 Valencia, Spain; [email p o ec ed].es (M.S.); [email p o ec ed].es (J.J.M.)
4Depa amen o de Física Aplicada II, Uni e sidad de Se illa, 41012 Se ille, Spain
*Co espondence: m [email p o ec ed]
Abs ac : The de elopmen o ad anced de ec ion sys ems o cha ged pa icles in lase -
based accele a o s and he need o p ecise ime o ligh measu emen s ha e led o he
c ea ion o de ec o s using ul a- hin plas ic scin illa o s, indica ing hei use as ansmis-
sion de ec o s wi h low ene gy loss and minimal dispe sion o p o ons a ound a ew
MeV. This s udy in oduces a new de ec ion sys em designed by he Ins i u e o Ins u-
men a ion in Molecula Imaging o ime o ligh and iming applica ions a he Na ional
Accele a o Cen e in Se ille. The sys em includes an ul a- hin EJ-214 plas ic scin illa o
coupled wi h a pho omul iplie ube and shielded by aluminized myla shee s. The p o o-
ype ins alla ion as an ex e nal igge sys em a he ion beam nuclea mic op obe o he
a o emen ioned acili y, along wi h i s empo al pe o mance and ion ansmission, was
ho oughly cha ac e ized. Addi ionally, he scin illa o hickness and uni o mi y we e ana-
lyzed using Ru he o d backsca e ing spec ome y. Resul s showed ha he expe imen al
hickness o he EJ-214 shee di e s by app oxima ely 46% om he supplie speci ica ions.
The de ec o esponse o MeV p o ons demons a es a s ong dependence on he impac
posi ion bu emains mos ly linea wi h he applied wo king bias. Finally, single ion de-
ec ion was success ully achie ed, demons a ing he applicabili y o his new sys em as a
diagnos ic ool.
Keywo ds: hin plas ic scin illa o ; ime-o - ligh ; iming applica ions
1. In oduc ion
Radia ion de ec o s play a c ucial ole in a wide ange o scien i ic and echnological
domains, including pa icle physics, nuclea secu i y, and medical diagnos ics [
1
,
2
]. Re-
cen ad ancemen s in pa icle accele a o s ha e led o he de elopmen o sophis ica ed
de ec ion sys ems capable o measu ing ex emely b ie ime in e als wi h high empo al
esolu ion [
3
]. These measu emen s a e pa icula ly c ucial o expe imen s in ol ing he
de e mina ion o mean li e imes o exci ed s a es, ad anced de ec ion sys ems o cha ged
pa icles in lase -based accele a o s wi h exceedingly high coun ing a es [
4
], and ime-o -
ligh s udies (ToF) o p ecise iming measu emen s. To mee hese equi emen s, a ange
o nuclea adia ion de ec o s a e employed, including o ganic and ino ganic scin illa ion
coun e s [
5
], Che enko de ec o s [
6
], and semiconduc o de ec o s [
7
]. Among hese
echnologies, plas ic scin illa o s ha e eme ged as essen ial senso s due o hei unique
Senso s 2025,25, 971 h ps://doi.o g/10.3390/s25030971
Senso s 2025,25, 971 2 o 23
cha ac e is ics and iming p ope ies, including high scin illa ion e iciency [
8
], as empo-
al esponse [
9
], e sa ili y in ab ica ion, and low cos wi h espec o con en ional c ys al
scin illa o s, which acili a e hei applica ion in nume ous expe imen al con ex s [10].
Plas ic scin illa o s a e ypically composed o a polyme ma ix, o en poly inyl oluene
(PVT), doped wi h o ganic compounds. These scin illa o s emi ligh due o he ionolumi-
nescence p ocess, a phenomenon in which ionizing adia ion exci es he doped o ganic
compounds, leading o he emission o op ical pho ons, p edominan ly in he isible spec-
um [
11
]. This ligh emission, known as scin illa ion, is de ec ed by pho osensi i e de ices
such as pho omul iplie ubes (PMTs) o pho odiodes, which enable he quan i ica ion and
analysis o he inciden adia ion [
12
]. The e sa ili y o plas ic scin illa o s ex ends o
nume ous applica ions: In high-ene gy physics [
13
], hey a e used as de ec o s o lase -
accele a ed p o ons [
14
] and calo ime y [
15
], p o iding c i ical da a on pa icle in e ac ions
and ene gy deposi ion. In medical physics, plas ic scin illa o s a e employed in posi on
emission omog aphy (PET) [
16
] and adia ion he apy dosime y [
17
], whe e p ecise and
eal- ime measu emen o adia ion doses is essen ial. Addi ionally, in secu i y and cosmo-
genic adia ion moni o ing, hese scin illa o s a e u ilized o de ec ing and quan i ying
adioac i e ma e ials, con ibu ing o sa e y and egula o y compliance [
18
]. Ve y hin
(
<60 µm
) plas ic scin illa o s coupled o he su ace o posi ion-sensi i e pho omul iplie
ubes ha e been u ilized o he spa ially esol ed de ec ion o
α
and
β
pa icles [
19
,
20
].
These hin- ilm de ec o s (TFDs) p o ide high scin illa ion ligh ou pu wi h minimal ene gy
loss o ansien pa icles, enabling ToF measu emen s o ligh ions in low-ene gy nuclea
physics expe imen s [
21
,
22
]. A p ominen example o hese ma e ials is he comme cial
ul a- hin plas ic scin illa o EJ-214. This wo k ocuses on he de elopmen and cha ac-
e iza ion o a new de ec o based on his no el plas ic scin illa o designed o pa icle
de ec ion and o be used as an ex e nal igge wi hin he mic op obe line a he Na ional
Accele a o Cen e (CNA) in Se ille [
23
]. U ilizing his new sys em as an ex e nal igge
will add ess he challenges associa ed wi h elying on au o- igge modes du ing he cha -
ac e iza ion o he empo al esponse o nuclea de ec o s, such as hose employed by he
Time-Resol ed Ion Beam Induced Cha ge (TRIBIC) echnique [
24
]. Mo eo e , he enhanced
iming capabili ies o his new sys em will suppo he in es iga ion o empo al p ocesses
in ou mic obeam chambe , including he s udy o anspo p ope ies in semiconduc o
de ec o s. This pape is o ganized as ollows: The in oduc ion ou lines he ad an ages o
he new hin plas ic scin illa o de ec o as a adia ion de ec o and p o ides an o e iew
o he cu en s a e o he a and applica ions o his ype o sys em. In Sec ion 2, we
desc ibe he new de ec ion sys em, ocusing on i s design, cons uc ion, and ins alla ion in
he CNA’s nuclea mic op obe. Sec ion 3discusses he hickness and uni o mi ies o he
de ec o , based on he analyses pe o med using he Ru he o d Backsca e ing Spec ome-
y (RBS) echnique. Sec ion 4co e s he cha ac e iza ion o he p o o ype pe o mance,
including he e ec s o ion impac loca ion on he de ec o esponse, he esponse as a
unc ion o he applied bias, and he easibili y o single ion de ec ion using pulsed p o on
beams. In he nex sec ion, we examine he ansmission o ions h ough he collima o
sli s, s udying he angula di e gence o he ou going ions om he scin illa o using he
Mon e Ca lo so wa e SRIM 2013 [
25
]. The pape con inues wi h p esen s an o e iew
o he expe imen al se up and he applica ion o he new de ec o o ToF measu emen s.
Finally, he conclusions summa ize he key indings ela ed o he pe o mance o his
de ec ion sys em.
2. Ma e ials and Me hods
The de eloped de ec ion sys em u ilizes a comme cial ul a- hin o ganic scin illa-
o ma e ial, Eljen EJ-214, which is manu ac u ed by Eljen Technology (Swee wa e , TX,
Senso s 2025,25, 971 3 o 23
USA) [
26
]. This ma e ial is speci ically o mula ed o use in ul a- hin ilms designed o
hea y ion s udies and beam moni o s [
27
]. EJ-214 emi s ligh in he blue egion o he
isible spec um, wi h maximum emission cen e ed a 435 nm. One o he main ad an ages
o EJ-214 is i s as decay ime, in he o de o nanoseconds, which allows o apid de ec ion
and excellen empo al esolu ion o as e en s. This makes EJ-214 scin illa o s ideal o
applica ions equi ing high-speed measu emen s, such as igge ing.
Addi ionally, he ligh e iciency and good anspa ency o EJ-214 enhance i s e -
ec i eness in a ious de ec ion scena ios. This imp o emen is a ibu ed o he e y
high concen a ion o wa eleng h shi e dopan s, which enhance he ma ching be ween
emission and abso p ion, he eby shi ing he p ima y scin illa ion ligh . This op imiza-
ion inc eases he ligh emission o pa icle beam iming applica ions while minimizing
beam ene gy deposi ion. Table 1summa izes he main p ope ies o EJ-214 acco ding o
he supplie . Based on hese p ope ies, a iming de ec o concep using his ul a- hin
plas ic scin illa o was de eloped and cons uc ed by he Ins i u e o Ins umen a ion o
Molecula Imaging (I3M). While de ec o s using hicke scin illa o s a e documen ed in
he li e a u e [
28
], he majo inno a ion o his app oach is he ul a- hin scin illa o , wi h a
nominal hickness o 25 µm, as speci ied by he supplie .
Table 1. Cha ac e is ics o he EJ-214.
E iciency (pho ons/1 MeV e−) 9000
Maximum Emission (nm) 435
Decay Time (ns) 2
No. o H A oms pe cm3(×1022)5.18
No. o C A oms pe cm3(1022)4.67
No. o N A oms pe cm3(1019)4.89
No. o O A oms pe cm3(1019)2.59
Densi y (g/cm3)1.02
So ening Poin (◦C) 60
The hickness o his new sys em enables he de ec o o be applied in ansmission
mode, as ions wi h ene gies in he ange o a ew MeV can pass h ough he ac i e olume
o he de ec o wi hou losing a signi ican amoun o ene gy. Fo e icien scin illa ion ligh
collec ion, wo app oaches ha e been his o ically p oposed: ei he by e lec ing i o an
ex e nal hollow mi o o by using an op ically anspa en guide ha co e s a signi ican
po ion o he TFDs’ su ace [
29
,
30
]. This capabili y acili a es ToF and iming measu emen s.
Du ing he cons uc ion, a single po ion o an EJ-214 scin illa o shee (ac i e olume) wi h
dimensions 10
×
45 mm was placed be ween wo polyme hylme hac yla e (PMMA) semi-
cylinde s (manu ac u ed by Kümpel [
31
]) in a sandwich s uc u e, in oduced
≈10 mm
om he edge. The dimensions o he PMMA cylinde s a e 10 mm in diame e and 30 mm in
heigh , and he dimensions o he scin illa o shee a e assumed o be
10 ×45 ×0.025 mm
.
As ionizing adia ion passes h ough he ma e ial, a ligh lash is gene a ed wi h a decay
ime o app oxima ely 2 ns. These pho ons a e di ec ed by he PMMA cylinde s, which
ma ch he scin illa o geome y and ac as ligh guides, anspo ing he pho ons o a
comme cial pho omul iplie ube (model R647 wi h an E849-35 socke by Hamama su
(Shizuoka, Japan) [
32
]) wi h a 10 mm diame e pho oca hode, maximum quan um e iciency
a 420 nm, and a ise ime o 2.1 ns acco ding o he da ashee . The o he po ion o he
ac i e olume is comple ely co e ed wi h a double laye o aluminized myla on bo h sides,
shielding he assembly om he backg ound ligh . A e comple ing he assembly, he main
componen s a e encased in a plas ic housing manu ac u ed ia 3D p in ing.
The maximum dimensions o he casing, including sc ews, a e 194 mm (leng h)
×
46 mm (wid h)
×
32 mm (heigh ). The ou pu signal is an analog pulse om he PMT
Senso s 2025,25, 971 4 o 23
anode. Two cables eme ge om he PMT socke : one o he high ol age powe supply
and he o he o he anode ol age (ou pu signal). A schema ic o he de ec o layou ,
showing he main componen s, is depic ed in Figu e 1.
1
2
Figu e 1. C oss-sec ion o he basic design o he plas ic de ec o , illus a ing he main componen s
housed wi hin a plas ic casing manu ac u ed using 3D p in ing.
One o he p ima y applica ions o his new ype o de ec ion sys em is o be used
as an ex e nal igge o o ToF measu emen s in acili ies ha wo k wi h ion beams,
such as he ion beam nuclea mic op obe a CNA. Fo his pu pose, he de ec o module
was designed wi h se e al mechanical componen s o ensu e i s e ec i e in eg a ion and
ope a ion wi hin he beamline, as well as i s abili y o in e cep he ion beams. I mus be
secu ely a ached unde acuum condi ions, and he sys em mus acili a e he mo emen
o he de ec o be ween posi ions wi hin and ou side he ion beam ajec o y wi hou
dis up ing his acuum. The cu en assembly a CNA was ins alled be o e he collima o
sli s, a a dis ance o 38 cm, as illus a ed in Figu e 2.
1
2
Figu e 2. Diag am o he auxilia y mechanical sys em showing he main componen s o he assembly
in he nuclea mic op obe beam line.
This assembly includes a ube, labeled T, which is a componen o he andem beamline
in he accele a o . The new assembly has been a ached o he side ou pu o his ube. To
allow he de ec o o mo e be ween posi ions inside and ou side he ion beam, a 100 mm
linea ac ua o is employed. The ac ua o is moun ed a one end o he T-shaped ube,
which also equi es an addi ional educe o secu e a achmen . The o he end o he ube
connec s o he beamline ia an in e media e adap e . The side ou pu o he T-shaped
ube is sealed wi h a lange ha inco po a es wo BNC bulkhead connec o s: one o he
anode eadou and he o he o he PMT pola iza ion. In his se up, he ac ua o ea u es a
cylind ical od ha mo es back and o h.
Senso s 2025,25, 971 5 o 23
An addi ional aluminum coupling secu ely holds he de ec o and suppo s i s weigh .
The main module is a ached o he on ba o he ac ua o . When he ac ua o is ex ended
o i s ull leng h, he de ec o is ully posi ioned in he ion beam pa h, ensu ing p ecise align-
men and e ec i e ope a ion wi hin he pa icle accele a o sys em. All majo componen s
o he p oposed assembly we e supplied and manu ac u ed by JEV Ins umen s [33].
3. Resul s and Discussion
3.1. Thickness Cha ac e iza ion Using RBS
A comp ehensi e unde s anding o he s uc u e and composi ion o he elemen s
p esen in he new sys em based on he plas ic de ec o is essen ial o co ec ly in e p e ing
he ob ained esul s du ing i s ope a ion, bo h in e ms o i s esponse and i s use as a ToF
de ec o . The hickness o he main componen s o he de ec o was de e mined using he
RBS echnique [
34
]. Fo he analyses, he sandwich s uc u e ha o ms he inal de ec o ,
consis ing o aluminized myla /scin illa o /aluminized myla , was assembled. To acili a e
he analysis o he spec a, one o he myla shee s was also measu ed sepa a ely. In his
s udy, RBS measu emen s we e conduc ed using an IBM geome y in he mul ipu pose
chambe o he 3 MV Tandem accele a o o he CNA. The samples we e ins alled in a
ec angula sample holde (150
×
112 mm
2
) wi h holes ( o a oid i s signal in he spec a),
which can be mo ed in he X and Y di ec ions (pe pendicula o he di ec ion o he inciden
ion beam) using s eppe mo o s. The analysis was ca ied ou using p o ons accele a ed o
an ene gy o 3 MeV wi h a beam cu en o 1 nA. The RBS spec a we e measu ed wi h a
solid-s a e de ec o (passi a ed implan ed plana silicon de ec o o PIPS) wi h an ac i e
a ea o 50 mm
2
, posi ioned a 165
◦
. The beam diame e was se o 1 mm, and measu emen s
we e made e e y 5 mm o check he homogenei y o he plas ic scin illa o . The da a
acquisi ion (DAQ) sys em o he RBS measu emen s in he mul ipu pose chambe is
desc ibed in [
35
]. The ene gy calib a ion o he DAQ sys em was pe o med using a sample
consis ing o a hin laye o Au deposi ed on a C subs a e, oge he wi h he spec um o
he aluminized myla a ge . Figu e 3shows he expe imen al RBS spec a alongside he
simula ions ob ained using he SIMNRA code [
36
] o bo h he aluminized myla sample
and he comple e assembly wi h he EJ-214 shee .
The inne igu es show he layou s uc u e and expe imen al hickness o he analyzed
samples. Bo h myla and scin illa o con ain hyd ogen, so i is c ucial o ema k ha in
he RBS spec a he H signal does no appea , al hough i is essen ial o include i in he
simula ion o co ec ly calcula e he s opping powe . The analy ical p ocedu e assumed
he nominal composi ion o hese compounds p o ided by he supplie and adjus ed he
hickness acco dingly. In he case o he aluminized myla , al hough a backg ound signal
is obse ed coming om he ea o he acuum chambe , he s uc u e and hickness o
he myla and he Al coa ing on bo h sides a e clea ly isible. Fo he simula ion o he
sandwich s uc u e, he same myla composi ion and hickness measu ed in Figu e 3(Top)
we e used o bo h he op and bo om laye s, along wi h he heo e ical composi ion o he
EJ-214 scin illa o . The ee pa ame e s we e he hickness and oughness o his ma e ial.
To achie e a good simula ion o he RBS spec um, i was necessa y o include a scin illa o
oughness wi h a hickness dis ibu ion FWHM o 30,000
×
10
15
a /cm
2
, app oxima ely
20% o he hickness o he scin illa o . Al hough, a high ene gy, he Al and O signals om
he op myla laye a e clea ly sepa a ed, he C signal is pa ially o e lapped wi h he C
signal om he scin illa o in his case. The hickness de e mined by RBS (exp essed in
uni s o 10
15
a oms/cm
2
) o he aluminized myla shee and he plas ic de ec o a e lis ed
in Tables 2and 3, espec i ely. The co esponding physical hickness was calcula ed based
on he heo e ical densi ies o he ma e ials: SRIM p o ides he densi y o he aluminized

Senso s 2025,25, 971 6 o 23
myla shield, while he densi y o he scin illa o was supplied by he manu ac u e
(ρ= 1.02 g/cm3) [27].
2
3
Figu e 3. Expe imen al and simula ed RBS spec a ob ained wi h a 3 MeV p o on beam. The op
panel shows da a o a piece o aluminized myla , while he bo om panel p esen s da a o he
sandwich s uc u e con aining he aluminized myla shield o e an EJ-214 scin illa o shee .
Table 2. Aluminized myla : SIMNRA esul s.
S uc u e Aluminum Myla
Composi ion (%) Al H37C45O18
Thickness (1015 a /cm2)490 23,900
Physical hickness 81 nm 2.39 µm
Table 3. Scin illa o : SIMNRA esul s.
S uc u e EJ-214
Composi ion (%) H52.5C47.42O0.05N0.03
Thickness (1015 a /cm2)140,000
Physical hickness 13–14 µm
Senso s 2025,25, 971 7 o 23
Gi en ha he p ima y applica ion o his ype o hin de ec o in ol es ion ans-
mission, ensu ing he homogenei y o he plas ic shee hickness is a c i ical ac o . Any
signi ican a ia ion in hickness could in luence he ene gy loss and angula de ia ion
o he ion beams du ing hei use. To e alua e he hickness homogenei y o he EJ-214
sample, a se ies o RBS measu emen s we e conduc ed wi h a 3 MeV p o on beam a
di e en posi ions wi h 5 mm in e als, co e ing a o al leng h o 85 mm o he sample.
The a ge was mo ed using s eppe mo o s, which allowed o p ecise ho izon al and
e ical displacemen wi h an accu acy o 10
µ
m. Figu e 4illus a es he RBS spec a o wo
posi ions (0 mm and 70 mm) along he ho izon al axis, selec ed o ep esen he minimum
and maximum hickness measu ed du ing he i adia ion scan, wi h all o he measu e-
men s alling wi hin his ange. No spa ial dependence on hickness was obse ed ac oss
he measu ed poin s be ween hese wo alues. Based on hese esul s, he expe imen al
hickness a ies be ween 13 and 14
µ
m wi h an unce ain y in he adjus men o a ound
5%, indica ing excellen homogenei y in he ac i e olume o he EJ-214 sample. The com-
posi ion ma ches he nominal alue, bu he scin illa o hickness is 46% below he supplie
a e age (
25 ±7µm
). The expe imen al hickness is c ucial o accu a ely calcula ing he
ion ene gy loss h ough he de ec o when conduc ing simula ions wi h SRIM, which we e
ca ied ou du ing he de elopmen o his s udy. Finally, i is impo an o emphasize
ha he piece analyzed by RBS is no he same as he one ins alled in he de ec o . Fo
he de ec o assembly, a 10
×
45 mm
2
piece was cu om he o iginal scin illa o shee
(dimensions 100
×
100 mm
2
), in close p oximi y o he egion used o RBS analysis (a piece
wi h dimensions 100
×
20 mm
2
). This p ecau ion was aken because he scin illa o shee
was exposed o ion cu en s on he o de o nA, wi h a beam diame e o 1 mm (cu en
densi y o 1.27 ×10−7A/cm2) du ing RBS cha ac e iza ion.
Such cu en densi ies could po en ially deg ade he ligh emission p ope ies o he
scin illa o . To a oid adia ion-induced damage and ensu e op imal pe o mance in he
de ec o , he analyzed piece and he one ins alled in he de ec o we e di e en .
3
4
5
Figu e 4. Expe imen al RBS spec a o he scin illa o shee ob ained a posi ions x = 0 mm (blue) and
x = 70 mm ( ed). These wo posi ions ep esen he minimum and maximum hickness measu ed
o e he scan.
Senso s 2025,25, 971 8 o 23
3.2. Va iabili y o De ec o Response wi h Impac Poin
Due o he de ec o dimensions, i was no easible o pe o m he cha ac e iza ion
as a unc ion o he i adia ion loca ion in he ion beam mic op obe chambe ; o his
eason, he de ec o cha ac e iza ion was conduc ed a he ion implan a ion beam line a
he CNA [
37
]. The de ec o was moun ed on an elec ically isola ed pla o m inside he
acuum chambe be o e being i adia ed. To de e mine he posi ion o he ion beam, a high-
luminosi y scin illa o ma e ial, S Ga
2
S
4
:Eu
2+
(commonly e e ed o as TG-G een [
38
]),
was placed in he same plane and in close p oximi y o he de ec o . A high- esolu ion
Cha ge-Coupled De ice came a localized in one ex e nal po o he acuum chambe
allows o eco d he ligh emi ed by he scin illa o sample and de e mine he ion beam
posi ion. Wi h he aluminized myla shielding, ambien ligh can induce some in e e ence
signal in he PMT; so, o ensu e he accu acy o he de ec o esponse o he ion i adia ion,
all illumina ion sou ces in he icini y o he acuum chambe we e swi ched o , he eby
achie ing comple e da kness. A se o collima o sli s wi h a hombohed al shape was
employed along he ion beam line, e ec i ely educing he ion beam dimensions and
dec easing he cu en in ensi y o e he sample o a oid sa u a ion o he PMT. Fo hese
expe imen s, a pulsed p o on beam was employed. To achie e his, we used he beam
kicke ins alled a he ou pu o he ion sou ces. The kicke consis s o a pai o me al
pla es, o which a high ol age can be applied h ough a as solid-s a e swi ch, model
FSWP 51-02 om Behlke (D eieich, Ge many), in o de o de lec he low-ene gy p o ons.
The bunch leng h and epe i ion a e we e con olled by an inpu pulse gene a o , model
AFG 310000 se ies om Tek onix (Bea e on, OR, USA). The empo al p o iles o he
pulsed ion beam we e eco ded using he ou pu signal om he PMT connec ed o a as
oscilloscope (LeC oy, New Yo k, NY, USA, HDO9404, 4 GHz bandwid h, 40 Gs/s) wi h
50 Ωinpu impedance.
Finally, a comme cial high- ol age powe supply (NHR220 HV Sou ce om iseg,
Radebe g, Ge many) was used o apply he wo king bias o he PMT. A schema ic o he
expe imen al se up is displayed in Figu e 5.
3
4
5
Figu e 5. Expe imen al se up o he implan a ion chambe . The de ec o was exposed o a pulsed
p o on beam and he esponse was eco ded using a as oscilloscope as a unc ion o he ion
beam posi ion.
This se o measu emen s aims o in es iga e he dependence o a scin illa ion de ec o
esponse on he speci ic impac poin s o he ion beam. Du ing he measu emen s, he
ion beam was kep s a iona y o ensu e uni o m i adia ion, while he a ge was mo ed
along he X–Y axes using s eppe mo o s ha allowed o p ecise linea displacemen along
bo h axes, wi h a spa ial esolu ion o 0.1 mm pe s ep. This p ecision was c ucial o
accu a ely posi ioning he ion beam and ensu ing ha he scans co e ed he de ec o a ea
Senso s 2025,25, 971 9 o 23
ho oughly. Du ing his cha ac e iza ion a 2 MeV pulsed p o on beam was employed. In
con inuous mode, he beam was con igu ed o ha e a cu en o
≈
1.6 nA and a beam size
o
≈
1 mm
2
. The beam cu en was measu ed using a cu en in eg a o (Model 1000C
by B ookha en Ins umen s Co po a ion, New Yo k, NY, USA). To mi iga e he isk o
sa u a ing he PMT due o excessi e ligh gene a ed in he scin illa o , he pulsed beam
ea u ed a pulse wid h o 1
µ
s and a epe i ion a e o 1 kHz, deli e ing app oxima ely
9400 p o ons pe pulse. Du ing he cha ac e iza ion, he de ec o was biased a
−
1000 V,
and a each designa ed i adia ion poin , a minimum o 8000 wa e o ms we e eco ded.
These da a we e subsequen ly p ocessed o line using a cus om Ma lab sc ip , which
a e aged he wa e o ms o enhance he signal- o-noise a io. Fo he ho izon al scan,
which co esponded o he mino dimension o he de ec o , ou dis inc impac poin s
we e selec ed a a ixed e ical posi ion o 17.5 mm om he PMMA, wi h each poin
spaced 2.8 mm apa . In he e ical di ec ion, ep esen ing he majo dimension o he
de ec o , eigh impac poin s we e chosen, cen e ed a X = 0 mm ( he cen e o he ho izon al
dimension), wi h spacing ca e ully de e mined o ensu e comple e co e age o he de ec o
su ace, wi h each poin spaced 5 mm apa . Figu e 6(Top) illus a es he empo al esponse
o he de ec o o he pulsed beam a a ious ho izon al posi ions along he de ec o anging
om −3.5 mm o 4.8 mm.
4
6
Figu e 6. (Top) A e aged empo al wa e o ms o he de ec o exposed o a 2 MeV pulsed p o on
beam a di e en ho izon al loca ions anging om
−
3.5 mm o 4.8 mm. The PMT was biased a
−
1000 V. (Bo om) Fla - op le el plo ed agains he impac posi ion along he ho izon al axis. The
magen a line indica es he bes pa abolic i o he se o da a.
Senso s 2025,25, 971 16 o 23
10
11
12
13
Figu e 12. Schema ic o he ToF sys em a he CNA nuclea mic op obe, showing de ec o s posi ioned
130 cm apa . The plas ic de ec o was ins alled 38 cm be o e he collima o sli s.
10
11
12
13
Figu e 13. Elec onic chain diag am o ToF expe imen s. The componen s a e labeled as ollows: CA
(Cu en Ampli ie ), PO (Pick-o ), TAC (Time- o-Ampli ude Con e e ), ADC (Analog- o-Digi al
Con e e ), MCA (Mul i-Channel Analyze ), and OSC (Oscilloscope).
Wi h his con igu a ion, he ou pu signal om he plas ic de ec o (S a signal)
ollowing he passage o an ion and he signal om he Si de ec o when i de ec s he same
ion (S op signal) a e ansmi ed o he se o pick-o s (Model 9307 by O ec, Oak Ridge, TN,
USA). They a e ypically used in applica ions wi h ul a- as de ec o s equi ing picosecond
p ecision, and ul a- as ci cui s a e inco po a ed o minimize ime slewing [
44
]. The ou pu
signals om he plas ic de ec o do no need any addi ional ampli ica ion; howe e , in
he case o he PIPS de ec o , he ou pu signal was ampli ied using a C2-HV B oadband
Ampli ie (Ci idec, Vienna, Aus ia) wi h a gain o +40 dB and an inpu /ou pu impedance
o 50
Ω
[
45
]. A e p ocessing each pulse o shape he signals app op ia ely, bo h signals
a e sen o he TAC (Model 567 by Ame ek, Oak Ridge, TN, USA). Finally, he ou pu
pulse is digi ized by an ADC (OM-1000e om Ox o d Mic obeams, Bices e , UK) and he
ampli ude dis ibu ion is p ocessed by an MCA. A e comple ing he signal p ocessing, a
his og am o he ime elapsed be ween wo de ec ed e en s a he S a and S op de ec o s,
known as he ime spec um, can be ob ained. The ini ial s ep in ensu ing accu a e ToF
measu emen in ol es he calib a ion o he elec onic chain o co ec ly assign he co ec
ime in e als o he ou pu signals om he MCA [
46
]. The calib a ion o he elec onic
chain was conduc ed using a Time Calib a o (TC) module (Model 462 by O ec), which
gene a es wo ou pu signals, o each igge e en , o known sepa a ion in ime delays
ha mimic he S a and S op signals. Fo he calib a ion, he TC was se o p oduce a
signal ain wi h a 10 ns pe iod and a ange o 160 ns. The ime di e ence be ween he
TC signals o each e en is igge ed by a andom gene a o wi h he same p obabili y

Senso s 2025,25, 971 17 o 23
dis ibu ion [
47
]. The TAC was se o a ange o 200 ns, so i only p ocesses signals wi h
ime di e ences o 200 ns o less, gene a ing an analog pulse wi h an ampli ude anging
om 0 V o 10 V, p opo ional o he ime di e ence be ween he S a and S op signals.
Figu e 14 (Top) shows he pulse heigh spec um ob ained du ing he calib a ion, whe e a
se o 16 peaks sepa a ed by he TC se pe iod a e clea ly isible.
11
14
Figu e 14. (Top) Pulse heigh spec um ob ained wi h a TC se o a pe iod o 10 ns and a ange
o 160 ns. The TAC was se o a ange o 200 ns. (Bo om) Time pe iods plo ed agains he mos
p obable cen oid o he peaks, wi h he blue line ep esen ing he bes linea i .
The leng h o he coaxial cables used o connec ions in oduces an addi ional em-
po al delay (app oxima ely 5 ns/m o 50
Ω
coaxial cables [
48
]) be ween he wo signals.
Howe e , his delay is cons an and does no signi ican ly a ec he sys em’s empo al
esolu ion, as he cable leng hs o bo h signals we e kep he same and sho enough o
a oid dis o ing he pulse shapes o high- equency signals [
49
]. The MCA was con igu ed
wi h a esolu ion o 10 bi s (1024 channels). Figu e 14 (Bo om) depic s he mos p obable
cen oid posi ion (ob ained om Gaussian i s o he peaks in he pulse heigh spec um) o
each peak as a unc ion o he TC pe iods ( ed squa es). The blue line ep esen s he bes i
o he da a ob ained h ough leas squa es i ing. I is obse ed ha , wi hin he selec ed
ange, he sys em exhibi s linea beha io (R
2
= 0.99999), and he calib a ion enables he
es ablishmen o a channel– ime in e al ela ionship, essen ial o ToF measu emen s and
he de e mina ion o he empo al esolu ion. The pe o mance o he calib a ed se up
was es ed by measu ing he ToF dis ibu ion o a 3 MeV p o on beam using he same
elec onic chain. Fo his measu emen , he plas ic de ec o was ully inse ed and biased a
−
1150 V, he PIPS de ec o was exposed o he ion beam wi h a wo king bias o +70 V, and
he coun a e a he Si de ec o was educed o a ew pa icles pe second. The ol age o
Senso s 2025,25, 971 18 o 23
he PMT was selec ed because he pick-o modules equi e a minimum h eshold in he
ampli ude o he inpu wa e o ms o p ocess he signal. Due o he angula di e gence
and ansmission o he ion beam o he mic op obe chambe , as well as he appea ance o
unco ela ed e en s due o he da k cu en in he PMT (which equency depends on he
applied bias), he coun a e is highe in he plas ic de ec o compa ed o he PIPS de ec o .
To disc imina e alse coincidence e en s and minimize dead ime in he TAC, he s a
signal was se o he pulse wi h he lowe coun a e, which, in his case, co esponds o he
PIPS de ec o . The TAC ange was se o 200 ns, and he h eshold disc imina o le els o
he pick-o s we e adjus ed o be abo e he elec onic noise le el. The beam, a e passing
h ough he quad upole iple , was ocused o a size o 2–5
µ
m. Figu e 15 displays he ToF
spec um measu ed o a 3 MeV p o on beam.
12
15
Figu e 15. ToF spec um o a 3 MeV p o on beam a eling 130 cm. The inse shows a zoom o he
main peak wi h he bes Gaussian i , indica ing a s anda d de ia ion σ= 2.3 ns.
Two no able ea u es a e e iden om his igu e: The main peak ep esen s he
empo al dis ibu ion o p o ons ( ue coincidence e en s) a eling and de ec ed in bo h
de ec o s. Addi ionally, he pulse heigh spec a a e obse ed o lie a op a con inuous
pla eau, which is a ibu ed o he andom occu ence o he da k cu en , esul ing in
unco ela ed ime e en s. E en hough he main peak is no comple ely symme ic, he
peak cen oid and empo al esolu ion o he sys em a e de e mined om he mean alue
and s anda d de ia ion o he Gaussian i o he main peak. F om he inne igu e, i can be
obse ed ha he e is good ag eemen be ween he empo al spec um peak (con inuous
blue line) and he Gaussian i (dashed ed line). F om his i ing, i is ound ha he
mos p obable ToF o he p o on beam is
≈
56.9 ns, wi h a s anda d de ia ion o 2.3 ns.
This a e age ToF pe ec ly ma ches he alue ob ained h ough SRIM simula ions, using
he ela i is ic eloci y equa ion and he p ojec ion along he incoming di ec ion. Fo ToF
measu emen s, he de ini ion o ime esolu ion a ies among di e en au ho s. In some
wo ks, i is con en ionally gi en by he oo mean squa e (RMS) o he iming di e ence
be ween he s a and s op signals [
50
]. Howe e , he common consensus de ines he ime
esolu ion o he acquisi ion sys em as he ull wid h a hal maximum (FWHM) o a p omp
coincidence ime dis ibu ion, assuming ha he iming unce ain ies in bo h b anches a e
Gaussian ype [51]. In ou expe imen al se up,
FWHM =2q2ln(2)σ≈5.4 ns (3)
Senso s 2025,25, 971 19 o 23
I is impo an o no e ha his ime esolu ion does no solely e lec he esolu ion
o he plas ic de ec o . Conside ing negligible con ibu ions om o he sou ces (such as
ime-walk, eadou elec onics, ime ji e , Landau luc ua ions, dis o ions, e c. [
52
]) o he
empo al esolu ion, he measu ed esolu ion can be exp essed as he quad a ic sum o he
esolu ions o he in ol ed de ec o s as ollows:
σ2
Measu ed ≈σ2
Plas ic +σ2
PIPS (4)
whe e
σMeasu ed
,
σPlas ic
, and
σPIPS
co espond o he measu ed empo al esolu ion, he
empo al esolu ion o he plas ic de ec o , and he empo al esolu ion o he PIPS de ec o ,
espec i ely. I should be no ed ha he empo al esolu ion o he PIPS de ec o is no
negligible compa ed o ha o he plas ic de ec o , so he measu ed empo al esolu ion
ep esen s an uppe limi o he ac ual esolu ion.
In addi ion o he ToF measu emen using he elec onic chain, he p ope unc ioning
o he ToF se up was u he e i ied by eco ding bo h he S a and S op signals o each
e en using he LeC oy HDO9404 high-speed oscilloscope. A se o
≈
1000 wa e o ms a e
shown in Figu e 16 o he plas ic de ec o (Top) and PIPS de ec o (Bo om).
13
16
Figu e 16. Selec ed wa e o ms o he plas ic de ec o (Top) and he PIPS de ec o (Bo om). The
wa e o ms we e eco ded using he wo-channel igge mode on he oscilloscope.
To a oid si ua ions whe e an ion does no hi he o he de ec o , he oscilloscope was
con igu ed in a wo-channel igge mode, equi ing bo h condi ions o be me o indica e a
coincidence e en . An e en is eco ded only when he wa e o ms simul aneously each
igge le els o
−
37.8 mV o he PIPS de ec o and
−
29.8 mV o he plas ic de ec o .
Senso s 2025,25, 971 20 o 23
As shown in Figu e 16, he indi idual wa e o ms om he plas ic de ec o a e as e (on
he o de o a ew ns) compa ed o he signals om he PIPS de ec o (on he o de o
ens o ns), esul ing in much na owe wa e o ms om he plas ic de ec o han om
he PIPS de ec o . Howe e , he plas ic scin illa o has a much wide peak dis ibu ion
han he PIPS de ec o due o he oscilloscope con igu a ion. Wi h his se up, he a i al
ime o he plas ic de ec o wa e o ms is measu ed o each e en ha sa is ies i s own
igge condi ions. Howe e , he ins an o ime (a i al ime) a which hese e en s occu
is ma ked by he PIPS de ec o , as his sys em de ines he o igin o ime o he coupled
sys em in ou cu en con igu a ion. As he ime-o - ligh o he ions ollows a dis ibu ion
due o ene gy s aggling as hey pass h ough he plas ic de ec o , he collec ed wa e o ms
p esen a wide dis ibu ion. To ob ain he ToF as he di e ence in he a i al imes o bo h
signals, one would ypically use ime–picko me hods such as Leading edge igge ing,
Fas ze o-c ossing igge ing, o he Cons an ac ion disc imina o [
53
]. Howe e , his
issue is a om he main goal o his measu emen , which was o e i y ha he esul s
ob ained wi h he ToF elec onics a e consis en wi h hose ob ained by di ec ly measu ing
he signals on he oscilloscope.
4. Conclusions
In his s udy, a de ec o based on a no el ul a- hin o ganic scin illa o was success-
ully ins alled and es ed a he CNA. This sys em ep esen ed he i s implemen a ion o
an ex e nal igge in he nuclea mic op obe o his acili y, demons a ing i s po en ial
o bo h single ion de ec ion and ToF measu emen s. One signi ican inding was ha
he expe imen al hickness o he scin illa o shee was no ably lowe han he speci ied
comme cial hickness. This de ia ion posed challenges ega ding signal ampli ude, as
obse ed du ing he e alua ion o he da k cu en . Howe e , i also con ibu ed o educed
ene gy s aggling, esul ing in a less pe u bed beam, which is c i ical o p ecise iming
measu emen s. The de ec o esponse showed a s ong dependence on he impac posi ion
o MeV p o ons; ne e heless, i emained p edominan ly linea wi h he applied wo king
bias. Al hough his spa ial dependency equi ed conside a ion, i did no impede he
sys em’s unc ion as an ex e nal igge in TRIBIC measu emen s, whe e he cen e o he
beam was aligned wi h he cen e o he de ec o a he op imal posi ion o he linea manip-
ula o . Mo eo e , a key ad an age o his se up was i s low ansmission alue h ough he
collima o sli s. Conside ing he dimensions o he ape u e, less han 0.6% o he inciden
ions ansmi ed h ough he collima o sli s o he 2 MeV p o on beam, which inc eased
o app oxima ely 1.6% o a 3 MeV p o on beam. This low ansmission unde sco es he
need o high cu en s a he de ec o loca ion, making he scin illa o an op imal choice
due o i s supe io adia ion ha dness, which enables ope a ion unde condi ions ha
would be de imen al o hin semiconduc o de ec o s used in ansmission mode while
s ill achie ing accep able ansmission le els o he mic op obe chambe . In conclusion, his
new se up shows g ea po en ial and signi ican ly enhances he capabili ies o he ion beam
nuclea mic op obe. Fu u e wo k will ocus on eplacing he PIPS de ec o wi h a Low Gain
A alanche De ec o (LGAD), which o e s negligible empo al esolu ion issues, he eby
allowing o a di ec measu emen o he empo al esolu ion o he plas ic scin illa o .
Au ho Con ibu ions: Concep ualiza ion, J.G.L., M.S., J.J.M. and M.d.C.J.R.; me hodology, M.R.R.
and J.G.L.; so wa e, M.R.R.; alida ion, M.R.R. and J.G.L.; o mal analysis, M.R.R.; in es iga ion,
M.R.R., J.G.L., C.T.M. and M.d.C.J.R.; esou ces, M.S. and J.J.M.; da a cu a ion, M.R.R.; w i ing—
o iginal d a p epa a ion, M.R.R.; w i ing— e iew and edi ing, M.R.R., J.G.L., M.S. and M.d.C.J.R.;
supe ision, J.G.L. and M.d.C.J.R.; p ojec adminis a ion, J.G.L., M.S. and M.d.C.J.R.; unding
acquisi ion, J.G.L., M.S. and M.d.C.J.R. All au ho s ha e ead and ag eed o he published e sion o
he manusc ip .
Senso s 2025,25, 971 21 o 23
Funding: This esea ch was pa ially unded by he Regional Minis y o Economy, Knowledge,
Business and Uni e si y g an numbe US-1380791. M.C. Jiménez-Ramos acknowledges he suppo
o his wo k h ough a VI PPIT-US con ac . This in es iga ion has also been pa ially inanced by
he p ojec e . ASTRO21/1.1/1 wi h inancing om he Eu opean Union—Nex Gene a ionEU, he
Minis y o Science, Inno a ion and Uni e si ies, Reco e y Plan, T ans o ma ion and Resilience, he
Depa men o Uni e si y, Resea ch and Inno a ion o he Jun a de Andalucía and he Uni e si y
o Se illa. P ojec CIAICO/2022/008, unded by he egional go e nmen (Gene ali a Valenciana)
wi hin he p og am “I+D+i Sub enciones pa a g upos de in es igación consolidados AICO”, has also
con ibu ed pa ial unding. Jessica Juan Mo ales holds a con ac by CSIC o he p og am ‘Talen
a ac ion and e en ion (Momen um)’, e . MMT24-I3M-01-01b. The unding o hese ac ions/g an s
and con ac s comes om he Eu opean Union’s Reco e y and Resilience Facili y Nex Gene a ion, in
he amewo k o he Gene al In i a ion o he Spanish Go e nmen ’s public business en i y Red.es
o pa icipa e in alen a ac ion and e en ion p og ammes wi hin In es men 4 o Componen 19 o
he Reco e y, T ans o ma ion and Resilience Plan.
Ins i u ional Re iew Boa d S a emen : No applicable.
In o med Consen S a emen : No applicable.
Da a A ailabili y S a emen : The o iginal con ibu ions p esen ed in he s udy a e included in he
a icle; u he inqui ies can be di ec ed o he co esponding au ho .
Con lic s o In e es : The au ho s decla e no con lic s o in e es .
Re e ences
1.
Tsoul anidis, N.; Landsbe ge , S. Measu emen and De ec ion o Radia ion, 5 h ed.; CRC P ess: Boca Ra on, FL, USA, 2021; pp. 177–260.
[C ossRe ]
2.
Gup a, T.K. Radia ion, Ioniza ion, and De ec ion in Nuclea Medicine, 1s ed.; Sp inge : Be lin/Heidelbe g, Ge many, 2013;
pp. 367–449. [C ossRe ]
3.
Michimasa, S.; Takaki, M.; Dozono, M.; Go, S.; Baba, H.; Ideguchi, E.; Kisamo i, K.; Ma suba a, H.; Miya, H.; O a, S.; e al.
De elopmen o CVD diamond de ec o o ime-o - ligh measu emen s. Nucl. Ins um. Me hods Phys. Res. B 2013,317, 710–713.
[C ossRe ]
4.
Huaul , M.; De Luis, D.; Apiñaniz, J.I.; De Ma co, M.; Salgado, C.; Go dillo, N.; Nei a, C.G.; Pé ez-He nández, J.A.; Fedoseje s, R.;
Ga i, G.; e al. A 2D scin illa o -based p o on de ec o o high epe i ion a e expe imen s. High Powe Lase Sci. Eng. 2019,7, 60.
[C ossRe ]
5.
Salgado, W.L.; Dam, R.S.F.; Ramos, L.L.; Da Sil a, A.X.; Con i, C.C.; Salgado, C.M. Expe imen al and simula ed me hods o
cha ac e ize he esponse o a scin illa o de ec o . Radia . Phys. Chem. 2022,192, 109895. [C ossRe ]
6.
Jacque , M.; Ansa i, S.; Gallin-Ma el, M.L.; And é, A.; Bou sie , Y.; Dupon , M.; Es-Smimih, J.; Gallin-Ma el, L.; Hé aul , J.;
Hoa au, C.; e al. A high sensi i i y Che enko de ec o o p omp gamma iming and ime imaging. Sci. Rep. 2023,13, 3609.
[C ossRe ]
7.
Ona u, K.; Ha a, K.; Ha ada, D.; Wada, S.; Nakamu a, K.; Unno, Y. S udy o ime esolu ion o low-gain a alanche de ec o s. Nucl.
Ins um. Me hods A 2021,985, 164664. [C ossRe ]
8.
Moisee , A.A.; Dee ing, P.L.; Ha man, R.C.; Johnson, T.E.; Nebel, T.R.; O mes, J.F.; Thompson, D.J. High e iciency plas ic
scin illa o de ec o wi h wa eleng h-shi ing ibe eadou o he GLAST La ge A ea Telescope. Nucl. Ins um. Me hods A 2007,
583, 372–381. [C ossRe ]
9.
Rocco, D.; Bela dini, A.; De G ego io, A.; De Simoni, M.; Fische i, M.; F anciosini, G.; Ma a ini, M.; Magi, M.; Musca o, A.; Pa e a,
V.; e al. TOPS as iming plas ic scin illa o s: Time and ligh ou pu pe o mances. Nucl. Ins um. Me hods A 2023,1052, 168277.
[C ossRe ]
10.
She ele , V.S.; Ishchenko, A.V.; Omelko , S.I.; Nagi nyi, V. New ul a as low-cos polyu e hane based plas ic scin illa o . J. Lumin.
2023,263, 120133. [C ossRe ]
11.
Jiménez-Ramos, M.C.; López, J.G.; Ga cía-Muñoz, M.; Rod íguez-Ramos, M.; Gázquez, M.C.; Zu o, B. Cha ac e iza ion o
scin illa o ma e ials o as -ion loss de ec o s in nuclea usion eac o s. Nucl. Ins um. Me hods Phys. Res. B 2014,332, 216–219.
[C ossRe ]
12.
Fa ell, R.; Olschne , F.; Shah, K.; Squillan e, M.R. Ad ances in semiconduc o pho ode ec o s o scin illa o s. Nucl. Ins um.
Me hods A 1997,387, 194–198. [C ossRe ]

Senso s 2025,25, 971 22 o 23
13.
Giguè e, C.; Ha , A.; Ba eman, J.; Ko ysko, P.; Fa abolini, W.; LeChasseu , Y.; Bazalo a-Ca e , M.; Beaulieu, L. Real- ime Plas ic
Scin illa ion Dosime y o Ul a-High Dose Ra e Ve y High Ene gy Elec ons (VHEE) a CERN CLEAR Facili y. J. Phys. Con . Se .
2024,2799, 012016. [C ossRe ]
14.
Seime z, M.; Bellido, P.; So iano, A.; López, J.G.; Jiménez-Ramos, M.C.; Fe nández, B.; Conde, P.; C espo, E.; González, A.J.;
He nández, L.; e al. Calib a ion and Pe o mance Tes s o De ec o s o Lase -Accele a ed P o ons. IEEE T ans. Nucl. Sci. 2015,
62, 3216–3224. [C ossRe ]
15.
Heelan, L.; On Behal o he ATLAS Collabo a ion. Pe o mance o he ATLAS Tile Calo ime e . J. Phys. Con . Se . 2015,623, 012014.
[C ossRe ]
16.
Ba an, J.; Chug, N.; Coussa , A.; Cu ceanu, C.; Cze wi´nski, E.; Dadga , M.; Dulski, K.; Gajewski, J.; Gajos, A.; Hiesmay , B.; e al.
Compa a i e s udies o plas ic scin illa o s ips wi h high echnical a enua ion leng h o he o al-body J-PET scanne . Nucl.
Ins um. Me hods A 2023,1051, 168186. [C ossRe ]
17. Bedda , A.S. Plas ic scin illa ion dosime y and i s applica ion o adio he apy. Radia . Meas. 2006,41, S124–S133. [C ossRe ]
18.
Tkaczyk, A.H.; Saa e, H.; Ipbüke , C.; Schul e, F.; Mas inu, P.; Paepen, J.; Pede sen, B.; Schillebeeckx, P.; Va asano, G. Cha ac e i-
za ion o EJ-200 plas ic scin illa o s as ac i e backg ound shield o cosmogenic adia ion. Nucl. Ins um. Me hods A 2018,882,
96–104. [C ossRe ]
19.
Yamamo o, S.; Iida, T. A posi ion-sensi i e alpha de ec o using a hin plas ic scin illa o combined wi h a posi ion-sensi i e
pho omul iplie ube. Nucl. Ins um. Me hods A 1998,418, 387–393. [C ossRe ]
20.
Mo ishi a, Y.; Hoshi, K.; To ii, T. E alua ion o an ul a- hin plas ic scin illa o o de ec alpha and be a pa icle con amina ion.
Nucl. Ins um. Me hods A 2020,966, 163795. [C ossRe ]
21.
Muga, M.L.; Bu nsed, D.J.; S eege , W.E.; Taylo , H.E. A new Time-O -Fligh pa icle de ec o . Nucl. Ins um. Me hods 1970,83,
135–138. [C ossRe ]
22.
Gelbke, C.K.; Hildenb and, K.D.; Bock, R. Time-O -Fligh spec ome e o hea y ions. Nucl. Ins um. Me hods 1971,95, 397–402.
[C ossRe ]
23.
Lopez, J.G.; Age , F.J.; Rank, M.B.; Mad igal, M.; On alba, M.A.; Respaldiza, M.A.; Ynsa, M.D. CNA: The i s accele a o -based
IBA acili y in Spain. Nucl. Ins um. Me hods B 2000,161–163, 1137–1142. [C ossRe ]
24.
Jiménez-Ramos, M.C.; López, J.G.; Osuna, A.G.; Vila, I.; Cu ás, E.; Ja amillo, R.; Hidalgo, S.; Pelleg ini, G. S udy o Ioniza ion
Cha ge Densi y-Induced Gain Supp ession in LGADs. Senso s 2022,22, 1080. [C ossRe ] [PubMed]
25.
Ziegle , J.; Ziegle , M.; Bie sack, J. SRIM—The s opping and ange o ions in ma e (2010). Nucl. Ins um. Me hods Phys. Res. B
2010,268, 1818–1823. [C ossRe ]
26. ELJEN Technology. A ailable online: h ps://eljen echnology.com (accessed on 13 No embe 2024).
27.
EJ-214 Da a Shee . A ailable online: h ps://eljen echnology.com/p oduc s/plas ic-scin illa o s/ej-214 (accessed on 13 No embe
2024).
28.
Seime z, M.; Bellido, P.; Conde, A.P.; Apiñaniz, J.I.; Ca pen ie , A.V.; Albaneda, M.S.; B ozas, F.V.; Méndez, C.; Lozano, J.;
Ál a ez, J.M.; e al. Time-o -Fligh de ec ion o Al ions om lase p oduced plasma. In P oceedings o he 2016 IEEE Nuclea
Science Symposium, Medical Imaging Con e ence and Room-Tempe a u e Semiconduc o De ec o Wo kshop (NSS/MIC/RTSD),
S asbou g, F ance, 29 Oc obe –6 No embe 2016. [C ossRe ]
29. Ba sch, T.; Moszynski, M. Timing p ope ies o hin scin illa o oils. Nucl. Ins um. Me hods 1975,123, 341–352. [C ossRe ]
30.
E ling, K.; Wi sch, W. A hin- ilm scin illa o de ec o o ligh ions in low-ene gy nuclea physics. Nucl. Ins um. Me hods 1978,
148, 299–301. [C ossRe ]
31.
Kümpel. A ailable online: h ps://www. echpilo .ne /p o iles/kuempel-kuns s o - e a bei ungswe k-gmbh_en.h ml (accessed
on 13 No embe 2024).
32.
Pho omul iplie Tube R647. A ailable online: h ps://www.hamama su.com/us/en/p oduc /op ical-senso s/pm /pm _ ube-
alone/head-on- ype/R647.h ml (accessed on 13 No embe 2024).
33. JEV Ins umen s. A ailable online: h ps://je ins umen s.com (accessed on 13 No embe 2024).
34.
Rocchini, M.; Chia i, M.; Pasquali, E.; Nannini, A.; HadyNska-Klek, K.; Sona, P.; Bazzacco, D.; Benzoni, G.; Came a, F.; Czelusniak,
C.; e al. Applica ions o Ru he o d backsca e ing analysis me hods o nuclea physics expe imen s. Nucl. Ins um. Me hods
Phys. Res. B 2021,486, 68–72. [C ossRe ]
35.
Fe e , F.J.; Alcai e, M.; Caballe o-He nández, J.; Ga cia-Ga cia, F.J.; Gil-Ros a, J.; Te iza, A.; Godinho, V.; Ga cía-López, J.;
Ba anco, A.; Fe nández-Camacho, A. Simul aneous quan i ica ion o ligh elemen s in hin ilms deposi ed on Si subs a es using
p o on EBS (Elas ic Backsca e ing Spec oscopy). Nucl. Ins um. Me hods Phys. Res. B 2014,332, 449–453. [C ossRe ]
36.
Maye , M. SIMNRA, a simula ion p og am o he analysis o NRA, RBS and ERDA. AIP Con . P oc. B. 1999,475, 541–544.
[C ossRe ]
Senso s 2025,25, 971 23 o 23
37.
Mo illa, Y.; Ma ín-Holgado, P.; Rome o, A.; Lab ado , J.A.; Fe nández, B.; P aena, J.; Lindoso, A.; Ga cía-Valde as, M.; Peña-
Fe nández, M.; En ena, L. P og ess o CNA o become he Spanish acili y o combined i adia ion es ing in ae ospace. In
P oceedings o he 18 h Eu opean Con e ence on Radia ion and I s E ec s on Componen s and Sys ems (RADECS), Go ebo g,
Sweden, 16–21 Sep embe 2018. [C ossRe ]
38.
Rod íguez-Ramos, M.; Jiménez-Ramos, M.C.; Ga cía-Muñoz, M.; López, J.G. Tempe a u e esponse o se e al scin illa o ma e ials
o ligh ions. Nucl. Ins um. Me hods Phys. Res. B 2017,403, 7–12. [C ossRe ]
39.
Seime z, M.; Bellido, P.; So iano, A.; Hue as, C.; López, J.G.; Jiménez-Ramos, M.C.; Fe nández, B.; Conde, P.; C espo, E.; González,
A.J.; e al. Time-o - ligh de ec o o he cha ac e isa ion o lase -accele a ed p o ons. In P oceedings o he 2013 IEEE Nuclea
Science Symposium and Medical Imaging Con e ence (2013 NSS/MIC), Seoul, Republic o Ko ea, 27 Oc obe –2 No embe 2013.
[C ossRe ]
40.
Ka ade , J.O.; Du bin, K.R.; Melani, R.D.; Des Soye, B.J.; Schachne , L.F.; Senko, M.W.; Comp on, P.D.; Kellehe , N.L. Indi idual
Ion Mass Spec ome y Enhances he Sensi i i y and Sequence Co e age o Top-Down Mass Spec ome y. J. P o eome Res. 2020,
19, 1346–1350. [C ossRe ]
41.
Wang, K.; Es ade, A.; Neupane, S.; Ba be , M.; Famiano, M.; Gin e , T.; McClain, D.; Nepal, N.; Pe ei a, J.; Scha z, H.; e al. Plas ic
scin illa ion de ec o s o ime-o - ligh mass measu emen s. Nucl. Ins um. Me hods Phys. Res. A 2020,974, 164199. [C ossRe ]
42.
Jiménez-Ramos, M.C.; Ga cía Osuna, A.; Rod iguez-Ramos, M.; Viezze , E.; Pelleg ini, G.; Godignon, P.; Ra í, J.M.; Rius, G.;
Ga cía López, J. Spec ome ic pe o mance o SiC adia ion de ec o s a high empe a u e. Radia . Phys. Chem. 2024,214, 111283.
[C ossRe ]
43.
E mis, E.E.; Celik as, C. Time esolu ion in es iga ions o gene al pu pose plas ic scin illa ion de ec o s in di e en hicknesses.
J. Radioanal. Nucl. Chem. 2013,295, 523–536. [C ossRe ]
44. Knoll, G.F. Radia ion De ec ion and Measu emen , 3 d ed.; John Willey: New Yo k, NY, USA, 1999; pp. 659–668.
45. CIVIDEC Ins umen a ion. A ailable online: h ps://ci idec.a /elec onics-C2-HV.h ml (accessed on 13 No embe 2024).
46.
Alshudi a , M.; G zywacz, R.; Paulauskas, S.V. De elopmen o a Segmen ed Scin illa o o Decay S udies. Phys. P ocedia 2015,
66, 445–450. [C ossRe ]
47.
Model 462 Time Calib a o Ope a ing and Se ice Manual. A ailable online: h ps://www.o ec-online.com/-/media/
ame eko ec/manuals/4/462-mnl.pd ?la=en& e ision=3e39cdc3-61dd-486 -a05b-784 61b022ee (accessed on 13 No embe 2024).
48.
FAQs Abou T ansmission Line E ec s. A ailable online: h ps://www.pulse esea chlab.com/pages/ aqs-abou - ansmission-
line-e ec s (accessed on 13 No embe 2024).
49.
See, F.; Lim, C.H. Dis o ion and designing o signals p opaga ing in a coaxial cable. In P oceedings o he Fou h In e na ional
Con e ence on In o ma ion, Communica ions and Signal P ocessing, 2003 and he Fou h Paci ic Rim Con e ence on Mul imedia.
P oceedings o he 2003 Join , Singapo e, 15–18 Decembe 2003. [C ossRe ]
50.
Vinke, R.; Lohne , H.; Schaa , D.R.; Van Dam, H.T.; Sei e , S.; Beekman, F.J.; Dendoo en, P. Op imizing he iming esolu ion o
SiPM senso s o use in TOF-PET de ec o s. Nucl. Ins um. Me hods Phys. Res. A 2009,610, 188–191. [C ossRe ]
51.
Wang, K.; Sama anayake, S.; Es ade, A. In es iga ion o a digi ize o he plas ic scin illa ion de ec o s o ime-o - ligh mass
measu emen s. Nucl. Ins um. Me hods Phys. Res. A 2022,1027, 166050. [C ossRe ]
52.
Ca iglia, N.; A cidiacono, R.; Baldassa i, B.; Bosca din, M.; Cenna, F.; Dellacasa, G.; Dalla Be a, G.F.; Fe e o, M.; Fadeye , V.;
Galloway, Z.; e al. T acking in 4 dimensions. Nucl. Ins um. Me hods Phys. Res. A 2017,845, 47–51. [C ossRe ]
53. Hi onen, L.M.; Suhling, K. Fas Timing Techniques in FLIM Applica ions. F on . Phys. 2020,8, 161. [C ossRe ]
Disclaime /Publishe ’s No e: The s a emen s, opinions and da a con ained in all publica ions a e solely hose o he indi idual
au ho (s) and con ibu o (s) and no o MDPI and/o he edi o (s). MDPI and/o he edi o (s) disclaim esponsibili y o any inju y o
people o p ope y esul ing om any ideas, me hods, ins uc ions o p oduc s e e ed o in he con en .