Arcobacter butzleri Biofilms: Insights into the Genes Beneath Their Formation

Citation: Salazar-Sánchez, A.; Baztarrika, I.; Alonso, R.; Fernández-Astorga, A.; Martínez-Ballesteros, I.; Martinez-Malaxetxebarria, I. Arcobacter butzleri Biofilms: Insights into the Genes Beneath Their Formation. Microorganisms 2022,10, 1280. https://doi.org/10.3390/ microorganisms10071280 Academic Editors: Ilana Kolodkin-Gal and Yun Chen Received: 15 May 2022 Accepted: 22 June 2022 Published: 23 June 2022 Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. Copyright: © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/). microorganisms Article Arcobacter butzleri Biofilms: Insights into the Genes Beneath Their Formation Adrián Salazar-Sánchez 1, Itsaso Baztarrika 1, Rodrigo Alonso 1,2, Aurora Fernández-Astorga 1, Ilargi Martínez-Ballesteros 1,2 and Irati Martinez-Malaxetxebarria 1,2,* 1 MikroIker Research Group, Department of Immunology, Microbiology and Parasitology, Faculty of Pharmacy, University of the Basque Country UPV/EHU, Paseo de la Universidad 7, 01006 Vitoria-Gasteiz, Spain; [email protected] (A.S.-S.); [email protected] (I.B.); [email protected] (R.A.); [email protected] (A.F.-A.); [email protected] (I.M.-B.) 2Bioaraba, Microbiology, Infectious Disease, Antimicrobial Agents, and Gene Therapy, 01006 Vitoria-Gasteiz, Spain *Correspondence: [email protected]; Tel.: +34-945-01-34-71 Abstract: Arcobacter butzleri, the most prevalent species of the genus, has the demonstrated ability to adhere to various surfaces through biofilm production. The biofilm formation capability has been related to the expression of certain genes, which have not been characterized in A. butzleri. In order to increase the knowledge of this foodborne pathogen, the aim of this study was to assess the role of six biofilm-associated genes in campylobacteria (flaA,flaB,fliS,luxS,pta and spoT) in the biofilm formation ability of A. butzleri. Knockout mutants were constructed from different foodborne isolates, and static biofilm assays were conducted on polystyrene (PS), reinforced glass and stainless steel. Additionally, motility and Congo red binding assays were performed. In general, mutants in flaAB, fliS and luxS showed a decrease in the biofilm production irrespective of the surface; mutants in spoT showed an increase on stainless steel, and mutants in pta and spoT showed a decrease on reinforced glass but an increase on PS. Our work sheds light on the biofilm-related pathogenesis of A. butzleri, although future studies are necessary to achieve a satisfactory objective. Keywords: Arcobacter butzleri; biofilm; knockout mutants; Congo red assay; static biofilm assays 1. Introduction Arcobacter butzleri is a Gram-negative bacterium with a wide environmental distribution, classified as a foodborne pathogen [ 1 ] due to its association with human gastrointestinal disease. A. butzleri is the most prevalent among the species of the genus and is frequently isolated from wild and farm animals’ excrements and intestinal regions (boar, ostrich, Eurasian collared dove and raccoon), farm animals’ meat (chicken, pork, beef, turkey, lamb, sheep, rabbit and quail meat), seafood products (clam, mussel, cockle, squid and shrimp), dairy products (raw cow milk and fresh cheese), vegetables (carrot, spinach, lettuce, chard, parsley, arugula and radish), environmental water and human stool [2–13]. The transmission of the species of the genus Arcobacter through the food chain seems to be favored by their ability to form biofilms [ 14 – 16 ]. Many food-related pathogens such as Aeromonas spp., Salmonella Typhimurium, Staphylococcus aureus,Listeria monocytogenes,L. ivanovii,Escherichia coli,Bacillus cereus,Cronobacter sakazakii,C. muytjensii, A. butzleri ,A. cryaerophilus,Pseudomonas aeruginosa,Klebsiella pneumoniae,Campylobacter jejuni and C. coli can produce these resistance structures conformed by cells and extracellular compounds [17–25] . The biofilm formation ability of Arcobacter species on different surfaces has also been documented [ 5 , 25 ], and it has become apparent that there is a notorious variability of the adherence level among strains of the same species. Due to the difficulty of eradicating biofilms and the rapidity with which A. butzleri develops them, preventing their formation is vital to control the spread of this foodborne pathogen [ 25 ]. Moreover, some Microorganisms 2022,10, 1280. https://doi.org/10.3390/microorganisms10071280 https://www.mdpi.com/journal/microorganisms Microorganisms 2022,10, 1280 2 of 16 authors referred that these structures could also contribute to the increase in antimicrobial resistance of A. butzleri since biofilm growth favors resistance gene transmission [24]. The biofilm formation process integrates different steps [ 26 ]. When planktonic bacteria find a stressful situation (i.e., carbohydrate, protein, fatty acid or other nutrient deficits; antibiotic exposure; and unfavorable temperature/atmosphere conditions [ 27 – 29 ]), cells start to adhere in a smooth and reversible manner to an available surface and to each other. Then, the production of exopolysaccharide (EPS) by the loosely adhered bacteria and/or the expression of specific adhesins located on pili and fimbriae leads to their irreversible attachment. At this point, sessile bacteria begin to form microcolonies, and the biofilm matures as they continue growing and producing EPS [ 30 – 32 ]. Finally, when the biofilm reaches a critical mass, cells detach from the outermost lawyer of growth, and the dispersion of planktonic cells from the biofilm occurs. The composition of the biofilm formed by Arcobacter still remains unknown, but, in general, the biofilm matrix is a complex structure that presents channels and pores throughout nutrients, oxygen and water flow. It is composed of approximately 15% of cells and 85% of EPS; this one is almost entirely conformed by water and contains in its’ solid-phase mainly polysaccharides, proteins and DNA [24,33]. Biofilm formation is dependent on many extrinsic factors such as growth medium, atmosphere, temperature, time, inoculum density and surface, but also on the intrinsic characteristics of each strain [ 14 , 15 , 25 , 34 ]. The biofilm formation capability has been related to the expression of genes of such diverse functions as motility, EPS production and cell signaling in many different bacteria. The expression of some of those genes is cell density-dependent, as the (p)ppGpp synthetase (i.e., spoT,relA,relP) and Quorum Sensing (QS) genes (i.e., luxS) [ 30 ]. In fact, low cell densities have been related to cell adhesion and high ones to cell detachment mediated by (p) ppGpp synthetases, and high cell densities also to biofilm formation as a result of QS autoinducer production [26,35,36] . In certain bacterial species, such as E. coli,P. fluorescens,P. aeruginosa,B. subtilis,Agrobacterium tumefaciens and Shewanella oneidensis, flagella and other surfaces structures such as fimbria, extracellular membrane proteins and amyloid-like fibrils are essential in the initial bacterial attachment and subsequent biofilm formation [ 24 , 26 , 30 , 37 – 51 ]. In fact, it has been demonstrated that functional flagella are necessary for maximum biofilm formation in species such as Campylobacter jejuni,A. tumefaciens and E. coli. This affirmation is supported by studies where the mutation of genes implicated in the synthesis of the flagellar filament (flaA,flaB,flaG,fliA and fliS in C. jejuni; and fliC in E. coli) [ 28 , 40 , 50 – 52 ] and hook (flgE in A. tumefaciens and P. aeruginosa) [ 46 , 53 ], flagellum movement (motA in A. tumefaciens ,C. jejuni and E. coli) [44,46,50,52] and flagellar gene regulation (fliA and qseB in E. coli, and fliW in C. jejuni) [ 44 , 54 ] showed reduced biofilm formation or no formation at all. Further, higher expression levels of the flaA gene were reported for L. monocytogenes growing in biofilm compared to planktonic form [55]. The gene spoT encodes the bifunctional (p) ppGpp synthase/hydrolase SpoT [ 56 ]. Among others, this alarmone has been related to flagellar gene regulation and biofilm formation as part of the stringent response in many bacteria such as E. coli,Legionella pneumophila,Mycobacterium tuberculosis,C. jejuni and Helicobacter pylori [ 56 – 59 ]. Lower expression levels of the flagellar genes flgH and flgE were noticed in spoT mutant strains in Vibrio spp [ 26 , 60 ]. The lack of flagella hindered the initial attachment and delayed the biofilm formation [ 26 , 60 ]. In H. pylori,spoT mutants formed lighter biofilms than the wild type, showing differences in the matrix conformation [ 59 ]. This gene has also been directly related to the upregulation of biofilm formation in E. coli,Streptococcus mutans,H. pylori and C. jejuni [59,61,62]. In 2015, Kim et al. [ 63 ] noticed that phosphate acetate (AcP) could play a role as a mediator in the expression of genes such as relP (a short RelA/SpoT Homologue (RSH) with alarmone synthase function [ 27 , 64 ]) and luxS (implicated in QS). The AcP is created via the Pta-AcK pathway, which has also shown an implication in the biofilm formation process of different bacteria such as S. mutants,E. coli and C. jejuni [ 40 , 63 , 65 ]. This pathway Microorganisms 2022,10, 1280 3 of 16 is composed of the enzymes Pta (i) and Ack (ii), encoded by pta and ackA, respectively, that work (i) transforming the acetyl-CoA into AcP and (ii) AcP into acetate [ 63 , 66 ]. In a recent transcriptional study of Campylobacter spp., the presence of the pta gene was related to biofilm production and its absence to weak or no-biofilm formation [ 67 ]. In contrast, other studies related the absence of pta with a biofilm increase in different species [ 40 , 65 , 68 ]. On the other hand, the highly conserved luxS gene [ 69 – 71 ] encodes the LuxS metalloprotease. This enzyme is involved in the production of the autoinducer-2 (AI-2), one of the most studied QS signaling molecules [ 35 ]. In the biosynthesis of AI-2, S-adenosylhomocysteine (SAH) is hydrolyzed to S-ribose homocysteine (SRH) by the enzyme Pfs, then transformed into 4,5-dihydroxy-2,3-pentanedione (DPD) by LuxS and finally self-cycled to form the AI-2 [ 35 , 72 , 73 ]. The LuxS/AI-2 QS pathway is related to a variety of processes such as biofilm production, plasmid transference, motility, drug resistance, adhesion and virulencegene expression [ 69 , 74 – 77 ]. In fact, luxS has been found necessary for an efficient biofilm formation in S. mutans,V. cholerae,Salmonella Typhi, L. monocytogenes,Lactobacillus rhamnosus, H. pylori,C. jejuni and Porphyromonas gingivalis [28,63,78–83]. A. butzleri presents homologous of the genes flaA,flaB,fliS,luxS,pta and spoT [ 5 ], but their function related to the biofilm formation has not been established yet. Nevertheless, it is reasonable to think that they may also affect adherence and biofilm formation in A. butzleri . Understanding the mechanism beneath the biofilm formation is vital for designing potential control strategies. Therefore, in order to increase the knowledge of A. butzleri pathogenesis, the aim of this study was to assess the role of six biofilm-associated genes in campylobacteria (flaA,flaB,fliS,luxS,pta and spoT) [ 28 , 40 , 62 , 67 , 84 ] in the biofilm formation ability of A. butzleri. 2. Materials and Methods 2.1. Bacterial Strains, Plasmids and Growth Conditions Four A. butzleri strains were selected for mutagenesis assays of biofilm-associated genes based on their different ability to form biofilms [ 5 , 14 ]. All of them had been previously isolated from different food products at retail [ 2 , 5 ] and presented biofilm-associated genes, as confirmed by PCR (see the following section). The reference strain A. butzleri RM 4018 was also included. All the strains and plasmids used in this study are listed in Table 1. Arcobacter strains were routinely grown at 37 ◦ C in Brain Hearth Infusion (BHI) broth (Oxoid, Basingstoke, UK) or on Columbia agar base plates (Oxoid, Basingstoke, UK) supplemented with 5% defibrinated horse blood (Liofilchem, Roseto degli Abruzzi, Italy). Escherichia coli strains were routinely grown at 37 ◦ C in Luria-Bertani (LB) broth or on LB agar plates (Condalab, Torrejón de Ardoz, Spain), supplemented with ampicillin ( 100 µg/mL ) (CAS: 69-52-3; Sigma-Aldrich, St. Louis, MO, USA) or kanamycin (50 µ g/mL) (CAS: 2538994-0; NZYTech, Lisbon, Portugal) when necessary. In both cases, the media were incubated aerobically for 24–48 h. 2.2. Growth Curve Measurements Overnight liquid cultures were diluted into fresh BHI to reach an optical density of 0.05 at 550 nm (OD 550 ). Two hundred microliters of each prepared bacterial suspension were inoculated into four wells of a 96-well flat-bottom microtiter plate (Nest Biotechnology, Wuxi, China), and the plates were placed in a Synergy TM HT plate reader (BioTek, Winooski, VT, USA) to monitor the OD 550 of the bacteria every hour for 24 h. The plates were maintained under aerobic conditions at 37 ◦ C and agitated at 17 Hz. The exponential growth rate was calculated from three independent growth experiments. 2.3. Biofilm-Associated Gene Detection The presence of six biofilm-associated genes (flaA,flaB,fliS,luxS,pta and spoT) was determined by individual PCRs performed on 100 ng of DNA with 1.25 U of Supreme NZYTaq II DNA Polymerase (NZYTech, Lisbon, Portugal), 0.1 mM of each dNTP, 1X buffer and 0.25 µ M of each primer set. All the primers used in this study are listed in Microorganisms 2022,10, 1280 4 of 16 Supplementary Materials Table S1. The PCR parameters were 5 min at 95 ◦ C; 30 cycles of 94 ◦ C for 30 s, annealing temperatures ranging from 50 to 56 ◦ C for 30 s and 72 ◦ C for 1 min ; and 10 min at 72 ◦ C. DNA from A. butzleri RM4018 was used as the positive control and deionized water as the negative one. 2.4. Construction of Knockout Mutant Strains Knockout (KO) mutants for biofilm-associated genes were constructed according to a previously described method [ 85 ] with some modifications. Briefly, the genes and their flanking regions were amplified by PCR using the proofreading enzyme ACCUZYME TM DNA polymerase (Bioline, Memphis, TN, USA), 5 0 -A tailed using BIOTAQ TM DNA polymerase (Bioline, Memphis, TN, USA) and cloned in the commercial cloning vector pGEM-T Easy (Promega, Madison, WI, USA). The resulting plasmids were linearized either by an outward PCR performed with BamHI cutting site containing primers (pGflaAB) or by restriction enzyme digestion with MunI, ClaI, BmtI or AflII (pGfliS, pGluxS, pGpta and pGspoT, respectively). The linearized plasmids were ligated to a kanamycin (Km) resistance cassette (aph(3 0 )-III) obtained from the pMW2 plasmid [ 86 ] either by BamHI digestion or by PCR amplification using primers that contained the appropriate restriction cutting site for each case. The orientation of the cassette and the ORFs was the same in all the constructed plasmids. 2.5. Motility Assays The motility of the strains was assayed by stab-inoculation of single colonies into thioglycolate semisolid agar plates (thioglycolate medium containing 0.4% agar) (Scharlau, Sentmenat, Spain). The plates were incubated under aerobic conditions at 37 ◦ C for 24 h, and the diameter of the motility zone was measured. The assays were carried out at least on three independent occasions. 2.6. Biofilm Formation Assays The biofilm formation ability of the strains on polystyrene (PS), reinforced glass and stainless steel was evaluated following previously described protocols [ 14 ] with minor modifications. For PS and reinforced glass assays, the inocula were adjusted to an optical density of 0.2 at 600 nm (OD 600 ), the incubations were performed at 37 ◦ C for 48 h, and the biofilms were stained with 200 µ L of crystal violet (1% water solution) (CAS: 548-62-9; Sigma-Aldrich, Steinheim, Germany). For stainless-steel assays, 7 mL of an OD600 = 0.2 cel l suspension was added to each coupon-containing tube, and the incubations were performed at 37 ◦ C for 24 h. After gently washing with distilled water, the coupons were transferred to 15 mL conical plastic tubes containing 7 mL of sterile 0.01 M phosphate-buffered saline (PBS) and 15 glass pearls. The biofilms formed on PS and reinforced glass were expressed by the biofilm formation index (BFI) according to Niu and Gilbert (2004) [ 87 ], and the strains were subsequently categorized as strong, moderate, weak or non-biofilm formers according to Naves et al. (2008) [ 88 ]. The biofilms formed on stainless steel were evaluated by plate count method on Mueller–Hinton agar (Oxoid, Basingstoke, UK), expressing the results as logUFC/cm2. 2.7. Congo Red Binding Assay For each strain, isolated colonies from overnight cultures were suspended in physiological saline (0.9% (w/v) NaCl) to 0.5 McFarland. Three 10 µ L drops of each inoculum were added onto Congo Red Agar (CRA) plates, which were composed of 37 g/L Brain Hearth Infusion broth (Oxoid, Basingstoke, UK) and 10 g/L of Bacteriological Agar (Scharlau, Sentmenat, Spain), supplemented with an autoclave-sterilized concentrated Congo red (CAS: 573-58-0; Acros Organics, Geel, Belgium) solution (20 mg/mL) in a final concentration of 0.1 g/L [ 89 – 91 ]. After 48 h of incubation at 37 ◦ C, the CRA plates were observed against a backlight to differentiate the color of the colonies. Four strains were tested on each plate, and the experiments were performed a minimum of three independent times. Strains with Microorganisms 2022,10, 1280 5 of 16 a red phenotype on CRA plates were considered cellulose producers and those with a white one as non-producers. 2.8. Data Analysis Statistical analyses were performed using the IBM SPSS Statistics 26 software (IBM Corp., New York, NY, USA). The normality of the numerical values obtained for each strain was determined by the Shapiro–Wilk test. The adhesion capacity, growth rate and motility of the strains were compared by Student’s t-test and one-way analysis of variance (ANOVA). Significant differences were established at pvalues of <0.05. 3. Results 3.1. Construction of Knockout (KO) Mutants and Growth Analysis Overall, all the genes were successfully knocked out. A total of 18 KO mutant strains were obtained from the five A. butzleri studied strains (Table 1). All the five expected mutants were obtained from the strains CCUG 30485 and CH11, four from CZ6, three from P8 and one from BER7. The most successfully mutated gene was pta, which could be inactivated in all the studied A. butzleri strains, followed by fliS and luxS in four. spoT and flaAB were inactivated in three and two strains, respectively. The comparison of the various mutants with their correspondent parent strain showed no differences in bacterial shape, colony formation on blood agar plates or growth rate in BHI (ANOVA-based p> 0.05 ) (Figure S1). Table 1. Bacterial strains and plasmids used in this study. Bacterial Strain or Plasmid Source/Function Reference Biofilm Formation 3 Biofilm Associated Genes Detected by PCR Arcobacter butzleri strains BER7 Wild strain isolated from cockle [5] 2.48 ±1.16 flaA,flaB,fliS,luxS,pta and spoT BER7∆pta::Km AB-BER7 derivative ∆ABU_RS02465::aph(30)-III This study CCUG 30485 Human clinical isolate (ATCC 49616; RM4018) CCUG 1 flaA,flaB,fliS,luxS,pta and spoT CCUG 30485∆flaAB::Km CCUG 30485 derivative ∆ABU_RS11245RS11250::aph(30)-III This study CCUG 30485∆fliS::Km CCUG 30485 derivative ∆ABU_RS01060::aph(30)-III This study CCUG 30485∆luxS::Km CCUG 30485 derivative ∆ABU_RS00560::aph(30)-III This study CCUG 30485∆pta::Km AB-CCUG 30485 derivative ∆ABU_RS02465::aph(30)-III This study CCUG 30485∆spoT::Km AB-CCUG 30485 derivative ∆ABU_RS03230::aph(30)-III This study CH11 Wild strain isolated from squid [5] 0.76 ±0.13 flaA,flaB,fliS,luxS,pta and spoT CH11∆flaAB::Km AB-CH11 derivative ∆ABU_RS11245-RS11250::aph(30)-III This study CH11∆fliS::Km AB-CH11 derivative ∆ABU_RS01060::aph(30)-III This study CH11∆luxS::Km AB-CH11 derivative ∆ABU_RS00560::aph(30)-III This study CH11∆pta::Km AB-CH11 derivative ∆ABU_RS02465::aph(30)-III This study CH11∆spoT::Km AB-CH11 derivative ∆ABU_RS03230::aph(30)-III This study CZ6 Wild strain isolated from quail [5] 3.00 ±2.90 fliS,luxS,pta and spoT CZ6∆fliS::Km AB-CZ6 derivative ∆ABU_RS01060::aph(30)-III This study CZ6∆luxS::Km AB-CZ6 derivative ∆ABU_RS00560::aph(30)-III This study CZ6∆pta::Km AB-CZ6 derivative ∆ABU_RS02465::aph(30)-III This study CZ6∆spoT::Km AB-CZ6 derivative ∆ABU_RS03230::aph(30)-III This study Microorganisms 2022,10, 1280 6 of 16 Table 1. Cont. Bacterial Strain or Plasmid Source/Function Reference Biofilm Formation 3 Biofilm Associated Genes Detected by PCR P8 Wild strain isolated from chicken [2] 9.44 ±6.07 fliS,luxS,pta and spoT P8∆fliS::Km AB-P8 derivative ∆ABU_RS01060::aph(30)-III This study P8∆luxS::Km AB-P8 derivative ∆ABU_RS00560::aph(30)-III This study P8∆pta::Km AB-P8 derivative ∆ABU_RS02465::aph(30)-III This study Escherichia coli strains E. coli DH5αNCCB2955 Competent cells for cloning NCCB 2 Plasmids pGEM-T Easy Cloning vector, AmprPromega pGflaAB pGEM-T Easy containing ABU_RS11245-ABU_RS11250 This study pGfliS pGEM-T Easy containing ABU_RS01060 This study pGluxS pGEM-T Easy containing ABU_RS00560 This study pGpta pGEM-T Easy containing ABU_RS02465 This study pGspoT pGEM-T Easy containing ABU_RS03230 This study pG∆flaAB pGEM-T Easy containing ∆ABU_RS11245-RS11250 This study pG∆fliS pGEM-T Easy containing ∆ABU_RS01060 This study pG∆luxS pGEM-T Easy containing ∆ABU_RS00560 This study pG∆pta pGEM-T Easy containing ∆ABU_RS02465 This study pG∆spoT pGEM-T Easy containing ∆ABU_RS03230 This study pG∆flaAB::Km pGEM-T Easy containing ∆ABU_RS11245-RS11250::aph(30)-III This study pG∆fliS::Km pGEM-T Easy containing ∆ABU_RS01060::aph(30)-III This study pG∆luxS::Km pGEM-T Easy containing ∆ABU_RS00560::aph(30)-III This study pG∆pta::Km pGEM-T Easy containing ∆ABU_RS02465::aph(30)-III This study pG∆spoT::Km pGEM-T Easy containing ∆ABU_RS03230::aph(30)-III This study pMW2 pBluescript KS M13 +:KmR (pILL550) [86] 1 CCUG: Culture Collection University of Gothenburg. 2 NCCB: Netherlands Culture Collection of Bacteria. 3Data obtained from Martinez-Malaxetxebarria et al. [ 5 ] and Girbau et al. [ 14 ]. Values are expressed as mean ± standard errors. 3.2. Motility Assays The motility of the strains, expressed in numerical values, is shown in Table 2. Representative images can be consulted in Figure S2. The five parent strains and most of the mutants (11 out of 18) were motile. In contrast, all those mutants in the flagellar genes (flaAB and fliS) and one in pta (BER 7 derivative) were non-motile. This loss of motility resulted as significant in all cases (p ≤ 0.001). Among the motile strains, all the obtained spoT and luxS mutants except P8 ∆ luxS::Km showed higher motility than their corresponding parent strains, and so did the CCUG 30485 and CH11-derivative mutants in pta. In contrast, CZ6 and P8-derivative mutants in the same gene showed lower motility than their parent strains. None of the observed differences were statistically significant. 3.3. Biofilm Formation Assays The ability shown by the strains to form biofilms on different surfaces is resumed in Table 2. Under the experimental conditions, the majority of the strains (19 out of 22) formed biofilms on PS and were categorized as strong biofilm producers, especially P8 (p< 0.04). The exceptions were the strains CZ6, CZ6 ∆ luxS::Km and CZ6 ∆ fliS::Km, which did not show any adherence ability on this surface. Almost all mutants showed different biofilm formation abilities from their parent strains but the only significantly different one (p= 0.023) was that shown by BER7 ∆ pta::Km, which showed a BFI almost Microorganisms 2022,10, 1280 7 of 16 five times higher than BER7. On reinforced glass, all the strains formed biofilms, but their categorization differed from that on PS. Among the wild strains, BER7 was defined as weakly adherent, CZ6 as moderately adherent and CCUG 30485, CH11 and P8 as strongly adherent. On this material, all the mutant strains showed differences in their BFI values from their correspondent parent, and the ANOVA showed a significant reduction in the biofilms formed by CZ6 ∆ fliS::Km and P8 ∆ fliS::Km (p= 0.033 and 0.001, respectively). In general, the biofilm formation ability of the strains was higher on PS than in reinforced glass, and according to Student’s t-test, it was significant for CH11 (p= 0.019). Regarding stainless steel, viable cells could be recovered from all the coupons, which indicates the capability of all the studied strains to form biofilms on this surface. Based on the ANOVA, the adhesion of CZ6 ∆ spoT::Km was significantly higher than that of its parental on this material. (p= 0.006). Table 2. Biofilm formation ability, motility and phenotype on CRA shown by the strains in this study. Bacterial Strain PS 1Reinforced Glass Stainless Steel (logUFC/cm2)Motility (cm) CRA 4 BFI 2Categ 3BFI 2Categ 3 BER7 1.679 ±0.609 S 0.462 ±0.093 W 2.285 ±0.292 2.833 ±0.233 White BER7∆pta::Km 8.263 ±3.108 * S 0.732 ±0.373 M 2.427 ±0.341 0.000 * White CCUG 30485 5.140 ±2.702 S 2.328 ±0.574 S 2.877 ±0.461 1.233 ±0.145 Red CCUG 30485∆flaAB::Km 5.144 ±1.981 S 0.965 ±0.278 M 1.832 ±0.113 0.000 * Red CCUG 30485∆fliS::Km 2.571 ±1.569 S 0.913 ±0.223 M 3.444 ±0.737 0.000 * Red CCUG 30485∆luxS::Km 3.191 ±0.421 S 1.008 ±0.337 M 2.901 ±0.494 1.233 ±0.186 Red CCUG 30485∆pta::Km 5.498 ±2.444 S 1.343 ±0.276 S 3.000 ±0.292 1.233 ±0.133 Red CCUG 30485∆spoT::Km 8.502 ±4.728 S 1.455 ±0.449 S 3.858 ±0.729 0.967 ±0.145 Red CH11 4.265 ±0.772 S 1.179 ±0.435 †S 4.233 ±0.373 1.067 ±0.033 White CH11∆flaAB::Km 2.822 ±1.544 S 0.748 ±0.205 M 3.433 ±0.332 0.000 * White CH11∆fliS::Km 3.171 ±2.154 S 0.542 ±0.187 W 4.322 ±0.260 0.000 * White CH11∆luxS::Km 2.650 ±1.852 S 0.693 ±0.200 W 3.934 ±0.450 1.167 ±0.067 White CH11∆pta::Km 4.997 ±3.366 S 0.248 ±0.096 N 4.367 ±0.597 1.433 ±0.203 White CH11∆spoT::Km 7.271 ±4.163 S 0.331 ±0.211 N 4.458 ±0.456 1.200 ±0.208 White CZ6 0.000 N 0.851 ±0.191 M 3.419 ±0.213 2.533 ±0.120 Red CZ6∆fliS::Km 0.007 ±0.007 N 0.176 ±0.102 * N 4.032 ±0.674 0.000 * Red CZ6∆luxS::Km 0.000 N 0.379 ±0.115 W 3.515 ±0.224 2.800 ±0.115 Red CZ6∆pta::Km 4.608 ±3.979 S 0.312 ±0.105 N 3.094 ±0.321 2.267 ±0.176 Red CZ6∆spoT::Km 4.852 ±4.685 S 0.706 ±0.211 M 4.700 ±0.148 * 2.900 ±0.058 Red P8 17.319 ±3.671 •S 3.825 ±0.257 S 5.989 ±0.140 2.600 ±0.153 White P8∆fliS::Km 7.961 ±1.448 S 1.752 ±0.270 * S 5.489 ±0.222 0.000 * White P8∆luxS::Km 13.706 ±2.152 S 4.547 ±0.752 S 5.944 ±0.179 2.167 ±0.088 White P8∆pta::Km 11.132 ±1.304 S 3.516 ±0.761 S 5.732 ±0.109 2.300 ±0.153 White 1 PS: Polystyrene. 2 BFI, Biofilm Formation Index. 3 Categ, categorization according to Naves et al., [ 88 ]: Strong (S), Moderate (M), Weak (W) and None (N). 4 CRA, phenotype shown on CRA plates. * Student’s t-based statistically significant (p< 0.05) differences obtained when comparing wild-type strains with their derivatives on each surface. • ANOVA-based statistically significant (p< 0.05) differences obtained when comparing the BFI values obtained on PS for each wild-type strain. † Student’s t-based statistically significant (p< 0.05) differences obtained when comparing biofilm formation on PS versus borosilicate. 3.4. Congo Red Agar Assays The wild BER7, CH11 and P8 strains turned out to be non-cellulose producers based on their phenotype on CRA plates (white growth). In contrast, the strains CCUG 30485 and CZ6 were cellulose producers (red growth). No differences were observed between wild and KO mutant strains. The pigmentation acquired by the strains when grown on CRA plates can be consulted in Figure S3. 4. Discussion The transmission and pathogenicity of many bacteria are related to their capacity to form biofilms [ 14 – 16 ]. These structures have gained great interest over the last years, and the mechanisms underlying their formation and maintenance are being elucidated in many bacterial species [ 25 – 30 , 35 , 40 , 63 , 68 , 92 ]. Nevertheless, this knowledge is still scarce for the foodborne pathogen Arcobacter butzleri. To address this item, in this study, we Microorganisms 2022,10, 1280 8 of 16 aimed to understand the role of flaA,flaB,fliS,luxS,pta and spoT in the biofilm formation process of this species. For this purpose, mutants in the abovementioned genes that are associated with biofilm formation in other campylobacteria were constructed, and their biofilm formation ability on various surfaces of different hydrophobicity was compared to that of their parent strains. In addition, the capability to form biofilms was also tested using the Congo red binding assay, widely used by other authors in species such as E. coli, K. pneumoniae,S. enterica and C. jejuni [29,93,94]. Congo red indicator binds to curli/fimbria and cellulose [ 95 , 96 ] and considering that A. butzleri does not have curli/fimbria, the assay indicates cellulose production in this species. Our results did not show differences between mutant and parent strains, suggesting that the inactivated genes apparently do not take part in cellulose production in A. butzleri. As far as we know, this is the first time where cellulose production by Arcobacter has been reported. Moreover, we are not aware of the presence of genes involved in this process in A. butzleri, which leaves the way open for new research lines. On the other hand, although it has been satisfactorily used to detect biofilm production in campylobacteria [ 29 ], the results obtained on the Congo red binding assay did not correlate with those obtained on the biofilm formation assays in our case. Both cellulose-producing (red growth) and non-producing (white growth) strains formed biofilms under the experimental conditions. This phenomenon has been previously described in some other species [ 97 ]. Consequently, we do not consider the Congo red binding assay to be reliable for the identification of biofilm-forming bacteria in this species. In accordance with previous studies held with both Gram-positive and negative bacteria [ 28 , 40 , 98 – 100 ], the results of this study point to the flagellum as an important structure implied in the biofilm formation of A. butzleri. The obtained mutants in the flaA and flaB genes (CCUG 30485 ∆ flaAB::Km and CH11 ∆ flaAB::Km) showed reduced biofilm-formation abilities compared with their parent strains in all the surfaces tested. Similarly, mutants of the fliS gene, which encodes the FliS chaperone responsible for flagellin protection and transport, adhered less than wild-type strains to PS and reinforced glass, especially CZ6 ∆ fliS::Km and P8 ∆ fliS::Km to the latter material (p= 0.033 and p= 0.001, respectively). However, three out of the four obtained fliS mutants, namely CCUG 30485 ∆ fliS::Km, CH11 ∆ fliS::Km and CZ6 ∆ fliS::Km, showed enhanced adhesion on stainless steel. The importance of a functional flagellum for maximum biofilm formation by campylobacteria has been previously reported. Studies held with Campylobacter spp. demonstrated that mutants on the flaA,flaB, fliA,flaG and motA genes showed reduced adhesion and biofilm formation ability [ 28 , 50 , 51 ]. Joshua et al. [ 40 ] observed that aflagellated C. jejuni fliS mutants were unable to attach to surfaces, and Hathroubi et al. [ 101 ] that aflagellated H. pylori mutants produced weaker biofilms. In other species, such as V. cholerae and P. aeruginosa, mutants with affectation in flagella showed compromised biofilm formation [ 102 , 103 ]. Despite not having tested the integrity of the flagella in our mutants in the flaA,flaB and fliS flagellar genes, the decreased motility observed for all of them could be indicative of their non-correct functionality. These three genes are essential for the synthesis and transport of the flagellin subunits that conform to the flagella filament [ 24 , 26 , 30 , 37 – 40 , 44 – 48 ]. Likely, the inactivation of any of these genes led to the production of lower flagellin levels and, consequently, to abnormal flagella with shorter filament or no filament at all, as previously reported elsewhere [ 104 ]. Mostly, the inactivation of flagellar genes is associated with a decrease in the ability to adhere [ 28 , 40 , 50 , 51 , 54 , 67 , 98 – 101 , 104 ]. In consonance with this, different transcriptional studies indicated that the expression of some flagellar genes is higher when bacteria grow on a biofilm compared to the planktonic state. L. monocytogenes seems to overexpress flaA when growing on biofilm [ 55 ]. Among campylobacteria, strongly adherent Campylobacter strains show higher expression levels of flaB and fliS than weakly adherent ones [ 67 ], and biofilm growing H. pylori upregulates various genes related to the formation of the flagellar apparatus [ 101 ]. Being primarily a mobility structure, the flagellum has important functions for biofilm formation as mechanosensing of surfaces [ 105 , 106 ] or being a component of the biofilm matrix [ 101 ]. Even so, and in line with previous observations [ 107 – 109 ], Microorganisms 2022,10, 1280 9 of 16 the enhanced adhesion observed in some of our flagellar mutants indicates that, though important, a functional flagellum is not essential for biofilm formation in A. butzleri. Future studies may elucidate whether a truncated filament (or its absence) has an influence on the composition or structure of the biofilm matrix. In addition, our results point to the possible presence of other surface-induced mechanisms involved in the early steps of the biofilm formation processes, as could be the adhesins CadF, PEB1a, JlpA, AcpA and CjaA, present in phylogenetically closely related species [110]. In general, the biofilms formed by luxS mutants were equal to or lower than those formed by the wild-type strains on the three studied surfaces. The role of the bacterial autoinducer-2 (AI-2) produced by luxS has been related to Quorum Sensing (QS), and this one with biofilm production [ 111 ]. The implication of QS in the biofilm production has been evidenced by the inactivation of genes coding for different signaling molecules and the subsequent reduction of the biofilm formed, such as the gene lasI in P. aeruginosa [112] and cep in Burkholderia cepacia [ 113 ]. The gene luxS has been found necessary for an efficient biofilm formation in S. mutans,V. cholerae,Salmonella Typhi and P. gingivalis [ 63 , 78 ]. In S. mutans,K. pneumoniae and C. jejuni, the lack of a functional luxS led to a decreased biofilm production [ 28 , 67 , 81 , 114 – 116 ], which is quite in accordance with our results. All our mutants in luxS adhered less than their parent strains except P8 and CZ6 derivatives on reinforced glass and stainless steel, respectively. Likewise, the absence of differences between the biofilms produced by wild-type and some luxS mutant strains (CZ6 ∆ luxS::Km in PS and all luxS mutants on stainless steel except CH11 ∆ luxS::Km) reported here had also been previously observed in K. pneumoniae [ 36 ] and S. gordonii [ 117 ]. In contrast, the inactivation of luxS increased the biofilm production in H. pylori [ 81 , 116 ]. Changes in biofilm morphology [ 69 , 114 , 117 ], motility reduction [ 52 ], decreased autoaggregation (which contributes to biofilm formation) [ 52 ], minimized growth [ 35 ] and reduced adhesion to cell lines [ 118 – 120 ] have also been reported due to the inactivation of luxS. Nevertheless, our results did not reflect growth differences between parent and luxS mutant strains. Broadly, mutants of pta showed an increase in their biofilm formation ability on PS, which was statistically significant for BER7 ∆ pta::Km (p= 0.023), but a reduction on reinforced glass. The effect of this mutation in biofilm formation on stainless steel varied among the tested strains. The lack of pta has been associated with both increased and decreased biofilm formation. The inactivation of pta led to hyperflagellated E. coli mutant strains in a study conducted in 2005 [ 121 ]. According to the authors’ observations, the increased intracellular phosphate acetate (AcP) pool underlies the flagellar expression change. As mentioned above, flagella play an important role in biofilm formation; therefore, mutants of pta could show enhanced biofilm production if they overexpress flagellar genes. This could be the case with our pta mutants, which showed a general increase in motility and formed higher biofilms on PS than their correspondent parent strains. Increased biofilm productions derived from the inactivation of pta have also been reported in E. coli,C. jejuni and S. mutans [ 40 , 63 , 65 ]. Nevertheless, and based on the reported effect of high AcP levels in the expression of luxS and the RelA/SpoT system [ 63 ], we could hypothesize that the inactivation of pta and the subsequent AcP increase can lead to reduced concentrations of AI-2 and (p)ppGpp, synthesized by LuxS and RelA/SpoT systems, respectively; and, consequently, contribute to the decrease in flagella formation, EPS production and biofilm generation [ 26 , 27 , 35 , 57 , 58 , 60 , 61 , 63 , 64 , 71 ]. This would be in accordance with the biofilm formation reduction we report here for all our pta mutant strains on reinforced glass and for those derived from CZ6 and P8 on stainless steel, in line with the biofilm formation reduction reported in S. mutans [63]. Regarding the spoT mutants, when compared to their parent strains, all presented an increased ability to produce biofilms on PS and stainless steel and a reduced one on reinforced glass. This is in agreement with the reduced biofilm formation on glass reported for V. cholerae [ 61 ] and Xanthomonas campestris pv. Campestris 8004 [ 122 ] mutants. Similarly, enhanced biofilms on PS were noticed in P. putida KT2440 [ 123 ] and V. alginolyticus [ 26 ]. This gene, which encodes the bifunctional (p)ppGpp synthase/hydrolase, has Microorganisms 2022,10, 1280 16 of 16 122. Bai, K.; Yan, H.; Chen, X.; Lyu, Q.; Jiang, N.; Li, J.; Luo, L. The Role of RelA and SpoT on PpGpp Production, Stress Response, Growth Regulation, and Pathogenicity in Xanthomonas campestris Pv. Campestris. Microbiol. Spectr. 2021 ,9, e02057-21. [CrossRef] [PubMed] 123. Liu, H.; Xiao, Y.; Nie, H.; Huang, Q.; Chen, W. Influence of (p)PpGpp on Biofilm Regulation in Pseudomonas Putida KT2440. Microbiol. Res. 2017,204, 1–8. [CrossRef] [PubMed] 124. Kim, K.; Islam, M.; Jung, H.; Lim, D.; Kim, K.; Lee, S.-G.; Park, C.; Lee, J.C.; Shin, M. PpGpp Signaling Plays a Critical Role in Virulence of Acinetobacter baumannii.Virulence 2021,12, 2122–2132. [CrossRef] [PubMed] 125. Davis, R.T.; Brown, P.D. SpoT-mediated Stringent Response Influences Environmental and Nutritional Stress Tolerance, Biofilm Formation and Antimicrobial Resistance in Klebsiella pneumoniae.APMIS 2020,128, 48–60. [CrossRef] 126. Watnick, P.I.; Lauriano, C.M.; Klose, K.E.; Croal, L.; Kolter, R. The Absence of a Flagellum Leads to Altered Colony Morphology, Biofilm Development and Virulence in Vibrio cholerae O139. Mol. Microbiol. 2001,39, 223–235. [CrossRef] 127. Vidal, O.; Longin, R.; Prigent-Combaret, C.; Dorel, C.; Hooreman, M.; Lejeune, P. Isolation of an Escherichia coli K-12 Mutant Strain Able To Form Biofilms on Inert Surfaces: Involvement of a New OmpR Allele That Increases Curli Expression. J. Bacteriol. 1998 , 180, 2442–2449. [CrossRef] 128. Brown, H.L.; Reuter, M.; Salt, L.J.; Cross, K.L.; Betts, R.P.; van Vliet, A.H.M. Chicken Juice Enhances Surface Attachment and Biofilm Formation of Campylobacter jejuni.Appl. Environ. Microbiol. 2014,80, 7053–7060. [CrossRef]