Design and optimization of manufacturing process

Grant Agreement number: 101058371 Project acronym: ESTELLA Project title: Design of biobased thermoset polymer with recycling capability by dynamic bonds for bio-composite manufacturing Grant Agreement number: 101058371 Project acronym: ESTELLA Project title: Design of biobased thermoset polymer with recycling capability by dynamic bonds for biocomposite manufacturing DELIVERABLE 3.2 Design and optimization of manufacturing process Contractual Date of Delivery: 20 November 2024 Actual Date of Delivery: 18 November 2024 Lead contractor for this deliverable: FUNDACIÓN CIDAUT Author(s): Alberto Blanco Rodríguez, Adrián Pedrosa Valbuena, Laura Matesanz-Niño Participants(s): CID, ICSO, WK+ WP contributing to the deliverable: WP3 Nature: Confidential Version V. 2 Grant Agreement 101058371 Project ESTELLA ESTELLA_D3.2.docx 7 Executive Summary This deliverable describes the study of composites obtained by resins and fibers developed by partners using sustainable and recyclable bio-based materials created in WP2 of the ESTELLA project. It includes the manufacturing process of these composites and the design of the necessary moulds to produce a demonstrator for the construction sector (window profile) and a component for the leisure and mobility sector (scooter platform). CID has carried out various tests with resins developed in WP2 by partners, as well as with the reinforcements studied in the same work package. For this, they have relied on the materials and expertise from NIC, ICSO, WR, WK+ and CEL. CID has defined the mould geometries, created simulation models, and finalized their design. This deliverable D3.2 has fully met the objectives set out in the Grant Agreement. No deviations have been identified in the deliverable or the